1/350 Japanese Navy Battleship Haruna Special Edition (Dazzle Camouflage)
$246.00
Skip to product information
■Product Description
Dazzle camouflage applied to the final stages of the battleship Haruna / includes decals for reproduction
●The product can reproduce the appearance of the ship during Operation Sho-Go in October 1944 and the dazzle camouflage in July 1945.
・Decals for the dazzle camouflage pattern on the 1st and 2nd main guns, additional machine gun mounts, and starboard high-angle gun mounts are included.
●Can be built with the unique molding expression of the large 1/350 scale.
・The hull and bottom are one piece and are assembled by joining the left and right sides.
・The portholes are molded to reproduce the appearance of a mix of closed and open ports, and the external electrical conduits are expressed as one piece of molding on the hull.
・The numerous intake and exhaust pipes seen on the wooden deck are made into separate parts to facilitate painting.
・The chrysanthemum emblem shining on the bow and the curved fairleads are made into separate parts for accurate three-dimensional representation.
・The main anchor chain is a metal chain.
・The linoleum deck retaining and aircraft transport rails are expressed with fine molding.
・The main gun turret is a special part that reproduces the characteristic curved leading edge of Haruna/Kirishima.
・The main guns can be elevated and depressed, and the main gun turrets can be rotated.
・The barrels of the main guns, secondary guns, and 12.7 cm twin anti-aircraft guns reproduce the muzzles using slide molding.
・Special parts are provided for the machine gun mounts that were added to the 2nd and 3rd main gun roofs, which differed from those at the start of the war.
・The bridge was enlarged in 1940-1941 when the anti-aircraft command post deck was remodeled, and its distinctive shape is reproduced.
・The bridge structure combines left and right parts and deck-like parts to express the vertical and horizontal surfaces to the fullest extent.
・Transparent parts are provided for the windows of the bridge, compass bridge, lower observation post, combat bridge, and target-finding post.
・The Type 22 and Type 21 radars, characteristic equipment of the latter half of the war, are made up of multiple parts.
・The numerous binoculars lined up in the anti-aircraft command post are injection molded parts, and the floor surface is reproduced with a grating pattern by engraving.
・The catapult is made up of four parts, with each surface expressed three-dimensionally.
・The 110cm searchlight is made of clear molded parts, and the lens surface can be expressed with painting techniques.
・The truss structure of the searchlight platform is divided into four parts, and can be finished in an open state.
・The rain cover pipe at the top of the funnel is a separate structure from the funnel, and the smoke passage is visible.
・The 25mm twin and triple machine guns have separate parts for the mounts and barrels, and are made with fine detail.
・The 25mm single-barrel machine gun mounted on the deck due to the reinforced anti-aircraft armament consists of two parts: the gun mount and the barrel.
・Bulletproof plates installed around the single-barrel machine gun are provided as injection molded parts.
・Two types of aircraft are included: the Type 0 (three-seat) seaplane reconnaissance aircraft and the Type 0 seaplane observation aircraft, one of each.
・The molded color is transparent, giving the canopy a realistic look when completed.
・Decals are included for the Hinomaru (Japanese national emblem) and various markings on the aircraft.
・One sheet of pre-cut paper stickers including signal flags, naval ensigns, and admiral's flags is included.
・Display base parts are included in black molded color.・A sticker with the ship name "Battleship Haruna" is included for display decoration.
The product is an unpainted kit that requires gluing, assembly, and painting.
The scale is 1/350, and it is a full-hull style including the bottom of the ship.
The molded parts consist of three colors: gray, clear, and black.
Finished dimensions: 64.1 x 9.2 cm (length x width)
[Contents included] Runners x 28, Assembly instructions x 3, Decals x 2, Metal parts x 1, Paper stickers x 2
■Product specifications
Manufacturer: Fujimi Models
Item No: Ship-13EX-1
Scale: 1/350
JAN: 4968728600796
■Notes
Please note that the color may appear different from the actual product due to monitor and image resolution issues. The product is brand new and unopened.
1/350 Japanese Navy Battleship Haruna Special Edition (Dazzle Camouflage)
$246.00
Dazzle camouflage applied to the final stages of the battleship Haruna / includes decals for reproduction
●The product can reproduce the appearance of the ship during Operation Sho-Go in October 1944 and the dazzle camouflage in July 1945.
・Decals for the dazzle camouflage pattern on the 1st and 2nd main guns, additional machine gun mounts, and starboard high-angle gun mounts are included.
●Can be built with the unique molding expression of the large 1/350 scale.
・The hull and bottom are one piece and are assembled by joining the left and right sides.
・The portholes are molded to reproduce the appearance of a mix of closed and open ports, and the external electrical conduits are expressed as one piece of molding on the hull.
・The numerous intake and exhaust pipes seen on the wooden deck are made into separate parts to facilitate painting.
・The chrysanthemum emblem shining on the bow and the curved fairleads are made into separate parts for accurate three-dimensional representation.
・The main anchor chain is a metal chain.
・The linoleum deck retaining and aircraft transport rails are expressed with fine molding.
・The main gun turret is a special part that reproduces the characteristic curved leading edge of Haruna/Kirishima.
・The main guns can be elevated and depressed, and the main gun turrets can be rotated.
・The barrels of the main guns, secondary guns, and 12.7 cm twin anti-aircraft guns reproduce the muzzles using slide molding.
・Special parts are provided for the machine gun mounts that were added to the 2nd and 3rd main gun roofs, which differed from those at the start of the war.
・The bridge was enlarged in 1940-1941 when the anti-aircraft command post deck was remodeled, and its distinctive shape is reproduced.
・The bridge structure combines left and right parts and deck-like parts to express the vertical and horizontal surfaces to the fullest extent.
・Transparent parts are provided for the windows of the bridge, compass bridge, lower observation post, combat bridge, and target-finding post.
・The Type 22 and Type 21 radars, characteristic equipment of the latter half of the war, are made up of multiple parts.
・The numerous binoculars lined up in the anti-aircraft command post are injection molded parts, and the floor surface is reproduced with a grating pattern by engraving.
・The catapult is made up of four parts, with each surface expressed three-dimensionally.
・The 110cm searchlight is made of clear molded parts, and the lens surface can be expressed with painting techniques.
・The truss structure of the searchlight platform is divided into four parts, and can be finished in an open state.
・The rain cover pipe at the top of the funnel is a separate structure from the funnel, and the smoke passage is visible.
・The 25mm twin and triple machine guns have separate parts for the mounts and barrels, and are made with fine detail.
・The 25mm single-barrel machine gun mounted on the deck due to the reinforced anti-aircraft armament consists of two parts: the gun mount and the barrel.
・Bulletproof plates installed around the single-barrel machine gun are provided as injection molded parts.
・Two types of aircraft are included: the Type 0 (three-seat) seaplane reconnaissance aircraft and the Type 0 seaplane observation aircraft, one of each.
・The molded color is transparent, giving the canopy a realistic look when completed.
・Decals are included for the Hinomaru (Japanese national emblem) and various markings on the aircraft.
・One sheet of pre-cut paper stickers including signal flags, naval ensigns, and admiral's flags is included.
・Display base parts are included in black molded color.・A sticker with the ship name "Battleship Haruna" is included for display decoration.
The product is an unpainted kit that requires gluing, assembly, and painting.
The scale is 1/350, and it is a full-hull style including the bottom of the ship.
The molded parts consist of three colors: gray, clear, and black.
Finished dimensions: 64.1 x 9.2 cm (length x width)
[Contents included] Runners x 28, Assembly instructions x 3, Decals x 2, Metal parts x 1, Paper stickers x 2
■Product specifications
Manufacturer: Fujimi Models
Item No: Ship-13EX-1
Scale: 1/350
JAN: 4968728600796
■Notes
Please note that the color may appear different from the actual product due to monitor and image resolution issues. The product is brand new and unopened.