1/700 Imperial Navy Series No. 57 Japanese naval warship
$50.00
Skip to product information
■Product Description
A full-hull model of the Hyuga during its battleship days, equipped with 6 turrets and 12 guns.
(Basic Specifications)
・The product is an unpainted kit that requires gluing, assembly, and painting.
・The scale is 1/700, and it is a full-hull specification including the bottom of the hull.
・The product is composed of conventional (Special Series) molds and newly added molds.
・The part below the waterline is made with molds designed in 2026, and the part above the waterline is made with molds designed in 2017.
(Product Specifications)
・The product is modeled after the refit, based on its appearance in the early stages of the Pacific War in 1941-1942, before its conversion into an aircraft carrier.
→The final form of the pure battleship (except when the No. 5 main gun was removed/experimental radar was installed), with the No. 5 and No. 6 main gun turrets still intact.
→The sides and wooden deck are specially designed parts for battleships. (Parts are not shared with aircraft battleships)
→A bridge different from that of aircraft battleships is expressed with a dedicated mold
●Hull
・The side parts are divided into left and right sections
→The sides and bottom of the hull are designed to be divided into parts at the waterline
・The portholes are unclosed and numerous are lined up along the sides, reproduced with delicate carvings
→The side parts are equipped with external electrical circuits, and the portholes are unclosed, which is unique to battleships
●Upper Deck
・Prepared as a dedicated part different from that of aircraft battleships
・Reproduced from the bow to the 6th main gun as a single integrated part
→The anchor chain guide plate and air intake are expressed as an integrated part with the deck
→The carvings of the wooden deck are designed to a depth that takes into account panel lining
・The aircraft work deck (linoleum-covered) is a separate part from the wooden deck
●Bridge
・A structure assembled by layering multiple parts Construction
→Composed of specially designed parts separate from those of an aircraft battleship
→The lower shelter deck, lower bridge, and upper bridge are integrated using slide molds
→The floors of each level above the compass bridge are covered with linoleum and strip patterns, with engraved details
→The floor of the anti-aircraft command post features finely engraved grating
→The bluework shape of the secondary gun command post is a Hyuga-specific part that reproduces the difference from the Ise
●Main guns and secondary guns
・The main gun barrels reproduce the muzzle using slide molds, and the elevation angle of the guns is fixed
・The main gun turrets have finely detailed surface shapes, and the rangefinders are separate parts
・The secondary guns are constructed with integrated casemates, waterproof covers, and barrels
●Chimneys and aircraft outfitting
・The chimneys are constructed with a left and right joined structure
・Truss structure around the chimney The structure is reproduced with separate parts
・The aircraft work deck at the stern is a separate part from the wooden deck section, reducing the painting work
・Three Type 95 seaplanes are included
●Rear Mast
・The mast is made up of multiple parts to reproduce its complex shape
→A dedicated part is prepared for the cross tree to reproduce the difference in shape from Ise
→The cross-shaped mast top is a Hyuga-specific piece
●Bottom of the Hull
・The bottom of the hull is a single piece for both the left and right sides
・The bulge below the waterline is a separate part from the bottom of the hull
・The bilge keel is expressed as one with the bulge
●Decals
・Two sheets of one type of decal are included
・Two sheets of decals include markings such as the naval ensign, national flag, and the Hinomaru on carrier-based aircraft
→Three sizes of naval ensigns, etc. are provided. The actual dimensions of the 10-width, 6-width, and 3-width aircraft are reproduced in 1/700 scale.
→Includes the Hinomaru (Japanese national emblem) on carrier-based aircraft, friendly identification stripes (yellow stripes), etc., and the Hinomaru also includes those without the white border from the later stages of the war.
[Contents] 27 sprues, 1 set of assembly instructions, 2 decals
Finished size: (approx.) 357 x 49 x 80 mm (length x width x height (101 mm if base is included))
[Design/Mold Development Period Information]
Main body: 2017, 2-piece machine gun parts: 2018, Hull bottom: 2026
■Product Specifications
Manufacturer: Fujimi Models
Item No: FH-57
Scale: Non-scale
JAN: 4968728452579
■Remarks
Please note that the color may appear different from the actual product due to monitor and image resolution issues. The product is new and unopened.
1/700 Imperial Navy Series No. 57 Japanese naval warship
$50.00
Shipping Calculator
Product Weight: 0.4 kg
A full-hull model of the Hyuga during its battleship days, equipped with 6 turrets and 12 guns.
(Basic Specifications)
・The product is an unpainted kit that requires gluing, assembly, and painting.
・The scale is 1/700, and it is a full-hull specification including the bottom of the hull.
・The product is composed of conventional (Special Series) molds and newly added molds.
・The part below the waterline is made with molds designed in 2026, and the part above the waterline is made with molds designed in 2017.
(Product Specifications)
・The product is modeled after the refit, based on its appearance in the early stages of the Pacific War in 1941-1942, before its conversion into an aircraft carrier.
→The final form of the pure battleship (except when the No. 5 main gun was removed/experimental radar was installed), with the No. 5 and No. 6 main gun turrets still intact.
→The sides and wooden deck are specially designed parts for battleships. (Parts are not shared with aircraft battleships)
→A bridge different from that of aircraft battleships is expressed with a dedicated mold
●Hull
・The side parts are divided into left and right sections
→The sides and bottom of the hull are designed to be divided into parts at the waterline
・The portholes are unclosed and numerous are lined up along the sides, reproduced with delicate carvings
→The side parts are equipped with external electrical circuits, and the portholes are unclosed, which is unique to battleships
●Upper Deck
・Prepared as a dedicated part different from that of aircraft battleships
・Reproduced from the bow to the 6th main gun as a single integrated part
→The anchor chain guide plate and air intake are expressed as an integrated part with the deck
→The carvings of the wooden deck are designed to a depth that takes into account panel lining
・The aircraft work deck (linoleum-covered) is a separate part from the wooden deck
●Bridge
・A structure assembled by layering multiple parts Construction
→Composed of specially designed parts separate from those of an aircraft battleship
→The lower shelter deck, lower bridge, and upper bridge are integrated using slide molds
→The floors of each level above the compass bridge are covered with linoleum and strip patterns, with engraved details
→The floor of the anti-aircraft command post features finely engraved grating
→The bluework shape of the secondary gun command post is a Hyuga-specific part that reproduces the difference from the Ise
●Main guns and secondary guns
・The main gun barrels reproduce the muzzle using slide molds, and the elevation angle of the guns is fixed
・The main gun turrets have finely detailed surface shapes, and the rangefinders are separate parts
・The secondary guns are constructed with integrated casemates, waterproof covers, and barrels
●Chimneys and aircraft outfitting
・The chimneys are constructed with a left and right joined structure
・Truss structure around the chimney The structure is reproduced with separate parts
・The aircraft work deck at the stern is a separate part from the wooden deck section, reducing the painting work
・Three Type 95 seaplanes are included
●Rear Mast
・The mast is made up of multiple parts to reproduce its complex shape
→A dedicated part is prepared for the cross tree to reproduce the difference in shape from Ise
→The cross-shaped mast top is a Hyuga-specific piece
●Bottom of the Hull
・The bottom of the hull is a single piece for both the left and right sides
・The bulge below the waterline is a separate part from the bottom of the hull
・The bilge keel is expressed as one with the bulge
●Decals
・Two sheets of one type of decal are included
・Two sheets of decals include markings such as the naval ensign, national flag, and the Hinomaru on carrier-based aircraft
→Three sizes of naval ensigns, etc. are provided. The actual dimensions of the 10-width, 6-width, and 3-width aircraft are reproduced in 1/700 scale.
→Includes the Hinomaru (Japanese national emblem) on carrier-based aircraft, friendly identification stripes (yellow stripes), etc., and the Hinomaru also includes those without the white border from the later stages of the war.
[Contents] 27 sprues, 1 set of assembly instructions, 2 decals
Finished size: (approx.) 357 x 49 x 80 mm (length x width x height (101 mm if base is included))
[Design/Mold Development Period Information]
Main body: 2017, 2-piece machine gun parts: 2018, Hull bottom: 2026
■Product Specifications
Manufacturer: Fujimi Models
Item No: FH-57
Scale: Non-scale
JAN: 4968728452579
■Remarks
Please note that the color may appear different from the actual product due to monitor and image resolution issues. The product is new and unopened.
About Reservations
Please note that the release date of pre-order items may be subject to significant delays.
Popular items may have limited availability, and orders may be cancelled if stock cannot be secured.
Please be sure to read the "Pre-order Notes" before placing a pre-order.
Pre-order Notes
Popular items may have limited availability, and orders may be cancelled if stock cannot be secured.
Please be sure to read the "Pre-order Notes" before placing a pre-order.