PLG1-PT01 pattern No. 1 is 0.1mm wide
$10.00
Skip to product information
■Product Description
No mistakes because you carve the inside of the groove! Sheet-type panel line guide tape is now available!
Contents: GUNPRIMER Panel Line Guide 1 (Pattern No. 1) various types
Number of guide tapes included: 96 sheets
Size variations:
Width 0.1mm (JAN: 4580610590116)
Width 0.2mm (JAN: 4580610590123)
Width 0.3mm (JAN: 4580610590130)
Groove width: 28mm (common to all types)
This is a set of sheet-type panel line guide tape.
The Panel Line Guide 1 series is mainly developed for beginners in panel line engraving.
This pattern guide is a tool for accurately and easily engraving broken-line straight panel lines on mechanical models.
Normally, when reproducing these panel lines using guide tape, you would cut the guide tape into small pieces, stick them in several places, and then engrave. This is very tedious, and engraving the same panel lines symmetrically on the sides of parts such as legs is extremely difficult.
This guide tape simplifies and streamlines this tedious process, and like other panel line guides, it reliably prevents overruns (the mistake of engraving beyond the intended area).
It is also slightly softer than Gannet's panel line guide tapes (various types), adheres firmly even to slightly curved surfaces, and leaves no adhesive residue when removed.
Each product contains a set of four sheets. Each sheet contains:
(1) 12 pieces each of 2mm and 3mm step lengths, total 24 pieces
(2) 12 pieces each of 2mm and 3mm step lengths in the opposite direction to (1), total 24 pieces
(3) 12 pieces each of 4mm and 5mm step lengths, total 24 pieces
(4) 12 pieces each of 4mm and 5mm step lengths in the opposite direction to (1), total 24 pieces
A total of 96 scribed guide tapes are included.
■Product Specifications
Manufacturer: G PARTS
Item No: PLG1-PT01
Size: Width 0.1mm Groove width: 28mm
JAN: 4580610590116
■Notes
*One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it.
When reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty.
【Precautions】
*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible.
PLG1-PT01 pattern No. 1 is 0.1mm wide
$10.00
No mistakes because you carve the inside of the groove! Sheet-type panel line guide tape is now available!
Contents: GUNPRIMER Panel Line Guide 1 (Pattern No. 1) various types
Number of guide tapes included: 96 sheets
Size variations:
Width 0.1mm (JAN: 4580610590116)
Width 0.2mm (JAN: 4580610590123)
Width 0.3mm (JAN: 4580610590130)
Groove width: 28mm (common to all types)
This is a set of sheet-type panel line guide tape.
The Panel Line Guide 1 series is mainly developed for beginners in panel line engraving.
This pattern guide is a tool for accurately and easily engraving broken-line straight panel lines on mechanical models.
Normally, when reproducing these panel lines using guide tape, you would cut the guide tape into small pieces, stick them in several places, and then engrave. This is very tedious, and engraving the same panel lines symmetrically on the sides of parts such as legs is extremely difficult.
This guide tape simplifies and streamlines this tedious process, and like other panel line guides, it reliably prevents overruns (the mistake of engraving beyond the intended area).
It is also slightly softer than Gannet's panel line guide tapes (various types), adheres firmly even to slightly curved surfaces, and leaves no adhesive residue when removed.
Each product contains a set of four sheets. Each sheet contains:
(1) 12 pieces each of 2mm and 3mm step lengths, total 24 pieces
(2) 12 pieces each of 2mm and 3mm step lengths in the opposite direction to (1), total 24 pieces
(3) 12 pieces each of 4mm and 5mm step lengths, total 24 pieces
(4) 12 pieces each of 4mm and 5mm step lengths in the opposite direction to (1), total 24 pieces
A total of 96 scribed guide tapes are included.
■Product Specifications
Manufacturer: G PARTS
Item No: PLG1-PT01
Size: Width 0.1mm Groove width: 28mm
JAN: 4580610590116
■Notes
*One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it.
When reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty.
【Precautions】
*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible.