Magnet Setter 2 for 3.0mm Magnets (1 Piece)
$4.00
Skip to product information
■Product Description
Simply stick it on to create a magnetic receiver
An essential item for magnetic attachment and detachment projects
Magnet Setter 2 is a magnetic sticker that can be used as a receiver for neodymium magnets. Made of a soft material that fits curved surfaces, and with a thickness of approximately 0.2 mm, it can be used to create magnetic receivers even on thin parts where it is difficult to embed magnets.
Notes on the circular cut type
Due to the die-cutting process, it is slightly curved in an arch shape. When attaching, press firmly to ensure the center is in close contact. Pressing with a rounded part such as the end of a ballpoint pen will ensure good adhesion.
Caution
・Using enamel paint for model making and solvents for panel lining may reduce the adhesive strength. Do not soak in solvents for extended periods.
・If the adhesive strength is insufficient, reinforce with instant adhesive or epoxy clear adhesive.
・Since it is made of cut metal, be very careful not to injure your fingers on the edges.
■Product Specifications
Manufacturer: HiQParts
Item No: MGST-C30
Size: Sheet size Width 49mm Depth 40mm Thickness 0.2mm
Seal size Size of one sheet Diameter 2.9mm Thickness 0.2mm
JAN: 4573211377804
Magnet Setter 2 for 3.0mm Magnets (1 Piece)
$4.00
Simply stick it on to create a magnetic receiver
An essential item for magnetic attachment and detachment projects
Magnet Setter 2 is a magnetic sticker that can be used as a receiver for neodymium magnets. Made of a soft material that fits curved surfaces, and with a thickness of approximately 0.2 mm, it can be used to create magnetic receivers even on thin parts where it is difficult to embed magnets.
Notes on the circular cut type
Due to the die-cutting process, it is slightly curved in an arch shape. When attaching, press firmly to ensure the center is in close contact. Pressing with a rounded part such as the end of a ballpoint pen will ensure good adhesion.
Caution
・Using enamel paint for model making and solvents for panel lining may reduce the adhesive strength. Do not soak in solvents for extended periods.
・If the adhesive strength is insufficient, reinforce with instant adhesive or epoxy clear adhesive.
・Since it is made of cut metal, be very careful not to injure your fingers on the edges.
■Product Specifications
Manufacturer: HiQParts
Item No: MGST-C30
Size: Sheet size Width 49mm Depth 40mm Thickness 0.2mm
Seal size Size of one sheet Diameter 2.9mm Thickness 0.2mm
JAN: 4573211377804