{"product_id":"4968728434094","title":"Japanese aircraft carrier Zuikaku (1941\/At The Time Of The Outbreak Of War) (Special Series: Special Standard)","description":"■Product Description\u003cbr\u003e\r\n The well-balanced second ship of the Shokaku-class, one of the largest aircraft carriers of the Imperial Japanese Navy, is now available in a standard STD version and a PLUS version with additional parts! \u003cbr\u003e\u003cbr\u003e(Basic Specifications)\u003cbr\u003e・Assembly is done by gluing, and it features a detailed design that pursues the ideal shape.\u003cbr\u003e・The molded color is mainly gray, and it is designed to be assembled while enjoying painting.\u003cbr\u003e\u003cbr\u003e・The product is based on the time of the attack on Pearl Harbor, which marked the start of the Pacific War, and the period thereafter.\u003cbr\u003e→The ship is not equipped with radar, and is equipped with a Type 94 anti-aircraft gun mount on the bridge, with only one of these mounts installed on the port side.\u003cbr\u003e→The additional machine gun mounts at the bow and stern have not yet been installed.\u003cbr\u003e →The markings, such as the white lines on the flight deck, are modeled after the start of the war in December 1941.\u003cbr\u003e→The carrier-based aircraft include a trio of aircraft that were active at the start of the war: the Zero Fighter Type 21, the Type 99 Dive Bomber, and the Type 97 Torpedo Bomber.\u003cbr\u003e\u003cbr\u003e(Standard version structure, specifications, and features)\u003cbr\u003e●Hull\u003cbr\u003e・Parts configuration with a left and right split structure\u003cbr\u003e・Structure incorporating internal reinforcing parts to ensure strength\u003cbr\u003e・Sponsons on the sides are designed as separate parts as much as possible to create a three-dimensional design\u003cbr\u003e・Equipped with external electrical wiring as part of the preparation work for the ship's hull. →The external electrical wiring is reproduced with delicate carvings, including the fasteners.\u003cbr\u003e・All portholes are open, as they appeared from the time of completion to the start of the war.\u003cbr\u003e・The hull bottom is designed to fit into the inside of the hull sides, and the area below the waterline is not reproduced.\u003cbr\u003e\u003cbr\u003e●Flight deck\u003cbr\u003e・A single part from bow to stern.\u003cbr\u003e・Windbreaks and three elevators are separate parts.\u003cbr\u003e →The elevators can be reproduced in the lowered position.\u003cbr\u003e →The windbreaks can be reproduced in the normal (down) position or the upright position.\u003cbr\u003e\u003cbr\u003e・The deck's shape is expressed with detailed carvings.\u003cbr\u003e・The wooden deck is expressed with detailed carvings.\u003cbr\u003e →The depth is designed to allow for a three-dimensional effect through panel lining, while also considering the overall shape.\u003cbr\u003e・Expansion joints are represented by recessed carvings.\u003cbr\u003e・The drainage gutters around the flight deck are reproduced.\u003cbr\u003e・The surface of the landing markings is represented by rounded recessed carvings.\u003cbr\u003e・The truss structure on the underside of the flight deck is represented by three-dimensional carvings.\u003cbr\u003e\u003cbr\u003e●Bow and stern\u003cbr\u003e・The anchor deck and stern deck are provided as separate parts from the sides.\u003cbr\u003e・The anchor deck has a structure in which bollards and anchor viewing platforms are represented as one piece.\u003cbr\u003e →The deck surface is represented by carvings of very fine split patterns (anti-slip).\u003cbr\u003e →All flight deck supports are separate parts, realistically reproducing the shape of each individual support.\u003cbr\u003e・The chrysanthemum emblem is a part that is carved as one piece with the emblem mounting plate (PLUS version comes with a separate part).\u003cbr\u003e\u003cbr\u003e・The two-tiered boat deck at the stern is designed with independent parts.\u003cbr\u003e →The boat cradles are integrated with the deck (the PLUS version includes separate parts with a more realistic shape)\u003cbr\u003e →The deck surface features a very fine split pattern (anti-slip) sculpted into it\u003cbr\u003e →All flight deck supports are separate parts, allowing each support to be reproduced with a realistic shape\u003cbr\u003e →The onboard boats are a 12-meter motorboat, an 11-meter motorboat, and a 13-meter special cargo boat, each made from a single integrated part (the PLUS version includes separate parts that make painting easier)\u003cbr\u003e →Equipment such as the loading practice gun and stern signal light are provided as separate parts to enhance realism.\u003cbr\u003e\u003cbr\u003e●Bridge and Funnel\u003cbr\u003e・The bridge base is a left and right split structure part.\u003cbr\u003e・The bridge windows are integrated with the compass bridge part (molded in gray).\u003cbr\u003e・The anti-aircraft command post is a separate part (the PLUS version includes a binocular telescope part for added detail).\u003cbr\u003e・Detailed fittings such as the ladder and 60cm signal light are each made up of separate\/independent parts.\u003cbr\u003e・The 60cm signal searchlight is molded in gray (the PLUS version is molded in transparent).\u003cbr\u003e \u003cbr\u003e・Both funnel parts are upper and lower split structure.\u003cbr\u003e →The U-shaped exterior and the molded details of the emergency smoke vents are well reproduced.\u003cbr\u003e・The guide plates inside the chimney and the lattice structure at the tip of the chimney are provided as separate parts for realistic detailing.\u003cbr\u003e●Anti-aircraft armament\u003cbr\u003e・The 12.7 cm twin high-angle guns are reproduced with and without shields as separate parts.\u003cbr\u003e →The A1 type without shields consists of 2 parts (the PLUS version includes 5 parts for realistic detailing).\u003cbr\u003e →The A1 type Kai 2 with shields consists of 2 parts (the PLUS version includes 3 parts for realistic detailing).\u003cbr\u003e \u003cbr\u003e・The 25 mm triple machine guns are molded as a single piece for easy assembly, and the parts are also well-detailed (the PLUS version includes 2-piece parts for easy painting).\u003cbr\u003e \u003cbr\u003e●Fittings\u003cbr\u003e・The mooring girders are separate parts from the sides of the hull.\u003cbr\u003e →Specifications allow you to choose to build either the deployed state when docked or the stowed state when sailing.\u003cbr\u003e・The gangway is made of separate parts, so the docked state can also be reproduced.\u003cbr\u003e\u003cbr\u003e●Carrier-based aircraft\u003cbr\u003e・For improved workability (prevention of damage when cutting gates), the carrier-based aircraft are molded in gray, and 3 types are included (the PLUS version has transparent molded parts, and 5 of each are included).\u003cbr\u003e\u003cbr\u003e・3 types: Zero fighter, Type 99 carrier bomber, Type 97 carrier attack aircraft\u003cbr\u003e・2 of each, a total of 6 are included (Japanese Navy carrier-based aircraft set 1 (early wartime) is available separately).\u003cbr\u003e→The Zero fighter is based on the Type 21. The F model features a detailed design with separate parts for the canopy, propeller, landing gear, and drop tanks.\u003cbr\u003e→The Type 99 Carrier Bomber is based on the Type 11, with separate parts for the canopy, propeller, landing gear, and bombs.\u003cbr\u003e→The Type 97 Carrier Attack Aircraft is based on the Type 3, with separate parts for the canopy, propeller, landing gear, and torpedoes.\u003cbr\u003e\u003cbr\u003e●Decals\u003cbr\u003e・Two types of decals, a total of two sheets, are included (the PLUS version includes one additional decal for the ship's name marking at the stern).\u003cbr\u003e・One sheet of decals is included that contains markings such as the white lines on the flight deck (re-examined\/newly created in 2026).\u003cbr\u003e→The flight deck markings are from the Pearl Harbor attack, the Indian Ocean operation, and the Battle of the Coral Sea.\u003cbr\u003e・One sheet of decals is included that contains markings such as the naval ensign, national flag, and the Hinomaru on carrier-based aircraft.\u003cbr\u003e→Three sizes of naval ensigns, etc. are available. The actual dimensions of the 10-width, 6-width, and 3-width aircraft are reproduced in 1\/700 scale.\u003cbr\u003e• Includes decals for aircraft markings.\u003cbr\u003e \u003cbr\u003e[Contents] Runner x 27 • Assembly instructions x 2 • Decals x 2\u003cbr\u003eFinished size is approximately 370 x 59 x 48 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e*Contents as of March 2026. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Fujimi Models\u003cbr\u003e\r\n Item No: Toku-044\u003cbr\u003e\r\n Scale: 1\/700\u003cbr\u003e\r\n JAN: 4968728434094\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n Please note that the color may appear different from the actual product due to monitor and image resolution issues. The product is brand new and unopened. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"fujimimokei","offers":[{"title":"Default Title","offer_id":46597331648670,"sku":"4968728434094","price":30.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4968728434094.jpg?v=1773165549","url":"https:\/\/tsurumai-hobby.com\/products\/4968728434094","provider":"TSURUMAI HOBBY","version":"1.0","type":"link"}