{"product_id":"4968728434070","title":"Japanese aircraft carrier Shokaku (1941\/At The Time Of The Outbreak Of War) (Special Series: Special Standard)","description":"■Product Description\u003cbr\u003e\r\n The first ship of the Shokaku-class, a well-balanced large aircraft carrier of the Imperial Japanese Navy, is now available in a standard STD version and a PLUS version with additional parts.\u003cbr\u003e\u003cbr\u003e(Basic Specifications)\u003cbr\u003e・It is an assembly kit that uses adhesive, and is characterized by its detailed construction that pursues the ideal form.\u003cbr\u003e・The molded color is mainly gray, and it is designed to be assembled while enjoying painting.\u003cbr\u003e\u003cbr\u003e・The product is based on the time of the attack on Pearl Harbor, which marked the start of the Pacific War, and the period thereafter.\u003cbr\u003e→The ship is not equipped with radar, and is equipped with a Type 94 anti-aircraft gun on the bridge, with only one of the same guns installed on the port side.\u003cbr\u003e→Bow And the additional machine gun mounts at the stern have not yet been installed.\u003cbr\u003e→The markings, such as the white lines on the flight deck, are modeled after the ship at the start of the war in December 1941.\u003cbr\u003e→The carrier-based aircraft include a trio of Zero Fighter Type 21, Type 99 Dive Bomber, and Type 97 Torpedo Bomber, which were active at the start of the war.\u003cbr\u003e\u003cbr\u003e(Standard version structure, specifications, and features)\u003cbr\u003e●Hull\u003cbr\u003e・Parts configuration with a left and right split structure\u003cbr\u003e・Structure incorporating internal reinforcing parts to ensure strength\u003cbr\u003e・Sponsons on the sides are designed as separate parts as much as possible to create a three-dimensional shape\u003cbr\u003e・Equipped with external electrical wiring due to preparation work for shipbuilding.\u003cbr\u003e →The external electrical wiring is reproduced with delicate carvings, including the fasteners.\u003cbr\u003e・All portholes are open, reproducing the appearance from completion to the start of the war.\u003cbr\u003e・The hull bottom is designed to fit into the inside of the hull sides, and the area below the waterline is not reproduced.\u003cbr\u003e\u003cbr\u003e●Flight deck\u003cbr\u003e・Designed as a single piece from bow to stern.\u003cbr\u003e・Windbreaks and 3 elevators are separate parts.\u003cbr\u003e →Elevators can be reproduced in the lowered position.\u003cbr\u003e →Windbreaks can be reproduced in the normal (down) position or the upright position.\u003cbr\u003e\u003cbr\u003e・The shape of the deck is expressed with detailed carvings.\u003cbr\u003e・The wooden deck is expressed with detailed carvings.\u003cbr\u003e →The depth of the panel lines is designed to create a three-dimensional effect through panel lining, while also considering the overall shape.\u003cbr\u003e・Expansion joints are represented by recessed carvings.\u003cbr\u003e・The drainage gutters around the flight deck are reproduced.\u003cbr\u003e・The surface of the landing markings is engraved with rounded recesses.\u003cbr\u003e・The truss structure on the underside of the flight deck is represented by three-dimensional carvings.\u003cbr\u003e\u003cbr\u003e●Bow and stern\u003cbr\u003e・The anchor deck and stern deck are separate parts from the sides.\u003cbr\u003e・The anchor deck has a structure in which bollards and anchor viewing platforms are represented as one piece.\u003cbr\u003e →The deck surface is represented by carvings of very fine split patterns (anti-slip).\u003cbr\u003e →All flight deck supports are separate parts, realistically reproducing the shape of each individual support.\u003cbr\u003e・The chrysanthemum emblem is a part that is engraved as one piece with the emblem mounting plate (the PLUS version has separate parts).\u003cbr\u003e・The two-tiered boat deck at the stern is reproduced as separate parts. →The boat cradles are integrated with the deck (the PLUS version includes separate parts with a more realistic shape)\u003cbr\u003e →The deck surface features a very fine split pattern (anti-slip) sculpted into it\u003cbr\u003e →All flight deck supports are separate parts, reproducing each support individually\u003cbr\u003e →The onboard boats are a 12-meter motorboat, an 11-meter motorboat, and a 13-meter special cargo boat, each made from integrated parts (the PLUS version includes separate parts for easier painting and color separation)\u003cbr\u003e →Equipment such as the loading practice gun and stern signal light are provided as separate parts to enhance realism.\u003cbr\u003e\u003cbr\u003e●Bridge and Funnel\u003cbr\u003e・The bridge base is a left and right split structure part.\u003cbr\u003e・The bridge windows are integrated with the compass bridge part (molded in gray).\u003cbr\u003e・Shaped to represent the ship with the anti-aircraft command post installed (the PLUS version includes binoculars for added precision).\u003cbr\u003e・Detailed fittings such as the ladder and 60cm signal light are each made up of separate\/independent parts.\u003cbr\u003e・The 60cm signal searchlight is molded in gray (the PLUS version is molded in transparent).\u003cbr\u003e \u003cbr\u003e・Both funnel parts are upper and lower split structure.\u003cbr\u003e →The U-shaped exterior and the molded details of the emergency smoke vents are well reproduced.\u003cbr\u003e・The guide plates inside the chimney and the lattice structure at the tip of the chimney are provided as separate parts for a realistic design.\u003cbr\u003e\u003cbr\u003e●Anti-aircraft armament\u003cbr\u003e・The 12.7 cm twin high-angle guns are reproduced with and without shields as separate parts. →The A1 type without a shield consists of 2 parts (the PLUS version includes 5 parts for a realistic shape).\u003cbr\u003e →The A1 type Kai 2 with a shield consists of 2 parts (the PLUS version includes 3 parts for a realistic shape).\u003cbr\u003e\u003cbr\u003e・The 25 mm triple machine guns are molded in one piece for easy assembly, and the parts are also well-designed (the PLUS version includes 2-piece parts for easy painting).\u003cbr\u003e\u003cbr\u003e●Fittings\u003cbr\u003e・The mooring girders are separate parts from the sides.\u003cbr\u003e →The specification allows you to choose to build either the deployed state when anchored or the stowed state when sailing. - The gangway is a separate part, allowing for the reproduction of the ship's appearance when at anchor.\u003cbr\u003e\u003cbr\u003e●Carrier-based aircraft\u003cbr\u003e- The carrier-based aircraft are molded in gray to improve workability (prevent damage when cutting gates), and three types are included (the PLUS version has transparent molded parts, and five of each type are included).\u003cbr\u003e\u003cbr\u003e- Three types: Zero fighter, Type 99 carrier bomber, and Type 97 carrier attack aircraft.\u003cbr\u003e- Two of each are included, for a total of six (a Japanese Navy carrier-based aircraft set 1 (early wartime) is available separately).\u003cbr\u003e→ The Zero fighter is based on the Type 21, with the canopy, propeller, landing gear, and drop tanks being separate parts. Detailed specifications\u003cbr\u003e→The Type 99 Carrier Bomber is based on the Type 11, with the canopy, propeller, landing gear, and bombs mounted as separate parts.\u003cbr\u003e→The Type 97 Carrier Attack Aircraft is based on the Type 3, with the canopy, propeller, landing gear, and torpedoes mounted as separate parts.\u003cbr\u003e\u003cbr\u003e●Decals\u003cbr\u003e・Two types of decals, a total of two sheets, are included (the PLUS version has one additional decal for the ship's name marking at the stern).\u003cbr\u003e\u003cbr\u003e・One sheet of decals is included that contains markings such as the white lines on the flight deck (re-examined\/newly created in 2026).\u003cbr\u003e→Flight deck markings are from the Pearl Harbor attack, the Indian Ocean operation, and the Battle of the Coral Sea.\u003cbr\u003e・One sheet of decals is included that contains markings such as the naval ensign, national flag, and the Hinomaru on carrier-based aircraft.\u003cbr\u003e→Three sizes of naval ensigns, etc. are available. Contents are based on the actual dimensions of 10 sq. wide, 6 sq. wide, and 3 sq. wide, scaled to 1\/700.\u003cbr\u003e・Includes decals for aircraft markings.\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Fujimi Models\u003cbr\u003e\r\n Item No: Toku-041\u003cbr\u003e\r\n Scale: 1\/700\u003cbr\u003e\r\n JAN: 4968728434070\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n Please note that the color may appear different from the actual product due to monitor and image resolution issues. The product is new and unopened.\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"fujimimokei","offers":[{"title":"Default Title","offer_id":46505158279326,"sku":"4968728434070","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4968728434070.jpg?v=1770917037","url":"https:\/\/tsurumai-hobby.com\/products\/4968728434070","provider":"TSURUMAI HOBBY","version":"1.0","type":"link"}