1/32 F-16CJ Block 50 Fighting Falcon
$123.00
Skip to product information
■Product Description
[A Masterpiece Fighter Aircraft of the US Air Force]
The US Air Force's F-16 was born as a small, lightweight air combat fighter, and through its excellent basic design and gradual improvements, it evolved into a powerful multirole fighter aircraft. The advanced F-16C featured improvements to the radar and cockpit, and in addition to the P&W F100 engine, it could also be equipped with the high-powered GE F110. In particular, the Block 50, which began deliveries in 1991, was equipped with the F110-GE-129 engine, which had even greater thrust. Furthermore, the type equipped with the capability to operate AGM-88 anti-radar missiles was called the F-16CJ and could perform Wild Weasel missions to suppress enemy air defense radar. With over 4,000 units produced, including its variants, the F-16 has become the most successful masterpiece fighter aircraft of the modern era.
■Product Specifications
Manufacturer: Tamiya
Item No: 60315
Scale: 1/32
JAN: 4950344603152
■Remarks
[Model Specifications]
This is a plastic model assembly kit of the US Air Force's multirole fighter jet F-16CJ. ★Scale 1/32, overall length 475mm, overall wingspan 296mm. ★The blended wing body, which creates the beautiful form of the F-16, is expressed by molding the upper surface of the main wing and the fuselage as a single piece. ★Screw fastening is used for the main parts of the aircraft. In addition, the landing gear struts are made of die-cast metal to ensure strength. ★The F110-GE-129 engine, which is characteristic of Block 50, is precisely modeled. Using the slide rail on the top of the engine bay, it can be attached and detached even after completion, just like the real aircraft. A trolley for mounting the engine is also included, so you can enjoy displaying it on its own or creating a diorama of a maintenance scene. ★A wide variety of weapons such as missiles are included. Two types of drop tanks and an AN/ALQ-184 ECM pod are also included, so you can reproduce the weapons mounting patterns that are currently commonly seen on F-16CJs belonging to the US Air Force. The weapons are attached using polycap fasteners so they can be attached and detached and replaced, allowing you to enjoy the differences in weapons for each mission with just one aircraft. ★The pitot tube on the nose and the discharge cables on the trailing edges of each wing are made of metal, and the radar antenna surface and chaff/flare dispensers are made of photo-etched metal for increased strength and texture. ★The control surfaces such as flaperons, horizontal stabilizers, and rudders can be fixed at popular angles using polycaps. Leading edge flaps that can be positioned up or down also add movement to the model. ★The ejection seat in the cockpit is mounted on a sliding rail, just like the real aircraft, and can be attached and detached even after completion. One seated pilot figure is included. ★Two types of canopy parts are included: clear and smoked. ★The air brakes on the rear fuselage can be opened or closed. ★The tires are made of realistic synthetic rubber. Wheel chocks for parking are also included. ★Four types of markings are available, including a Tiger Meet participating aircraft with flashy markings on the vertical stabilizer and an Iraqi Freedom participating aircraft. Masking stickers for canopy painting and a sheet of safety pin tags are also included. ★By removing the armament, canopy, and vertical stabilizer (secured with polycaps) from the completed model, you can use the inner lid as a base and store it in the package.
The photo shows the kit assembled and painted.
1/32 F-16CJ Block 50 Fighting Falcon
$123.00
[A Masterpiece Fighter Aircraft of the US Air Force]
The US Air Force's F-16 was born as a small, lightweight air combat fighter, and through its excellent basic design and gradual improvements, it evolved into a powerful multirole fighter aircraft. The advanced F-16C featured improvements to the radar and cockpit, and in addition to the P&W F100 engine, it could also be equipped with the high-powered GE F110. In particular, the Block 50, which began deliveries in 1991, was equipped with the F110-GE-129 engine, which had even greater thrust. Furthermore, the type equipped with the capability to operate AGM-88 anti-radar missiles was called the F-16CJ and could perform Wild Weasel missions to suppress enemy air defense radar. With over 4,000 units produced, including its variants, the F-16 has become the most successful masterpiece fighter aircraft of the modern era.
■Product Specifications
Manufacturer: Tamiya
Item No: 60315
Scale: 1/32
JAN: 4950344603152
■Remarks
[Model Specifications]
This is a plastic model assembly kit of the US Air Force's multirole fighter jet F-16CJ. ★Scale 1/32, overall length 475mm, overall wingspan 296mm. ★The blended wing body, which creates the beautiful form of the F-16, is expressed by molding the upper surface of the main wing and the fuselage as a single piece. ★Screw fastening is used for the main parts of the aircraft. In addition, the landing gear struts are made of die-cast metal to ensure strength. ★The F110-GE-129 engine, which is characteristic of Block 50, is precisely modeled. Using the slide rail on the top of the engine bay, it can be attached and detached even after completion, just like the real aircraft. A trolley for mounting the engine is also included, so you can enjoy displaying it on its own or creating a diorama of a maintenance scene. ★A wide variety of weapons such as missiles are included. Two types of drop tanks and an AN/ALQ-184 ECM pod are also included, so you can reproduce the weapons mounting patterns that are currently commonly seen on F-16CJs belonging to the US Air Force. The weapons are attached using polycap fasteners so they can be attached and detached and replaced, allowing you to enjoy the differences in weapons for each mission with just one aircraft. ★The pitot tube on the nose and the discharge cables on the trailing edges of each wing are made of metal, and the radar antenna surface and chaff/flare dispensers are made of photo-etched metal for increased strength and texture. ★The control surfaces such as flaperons, horizontal stabilizers, and rudders can be fixed at popular angles using polycaps. Leading edge flaps that can be positioned up or down also add movement to the model. ★The ejection seat in the cockpit is mounted on a sliding rail, just like the real aircraft, and can be attached and detached even after completion. One seated pilot figure is included. ★Two types of canopy parts are included: clear and smoked. ★The air brakes on the rear fuselage can be opened or closed. ★The tires are made of realistic synthetic rubber. Wheel chocks for parking are also included. ★Four types of markings are available, including a Tiger Meet participating aircraft with flashy markings on the vertical stabilizer and an Iraqi Freedom participating aircraft. Masking stickers for canopy painting and a sheet of safety pin tags are also included. ★By removing the armament, canopy, and vertical stabilizer (secured with polycaps) from the completed model, you can use the inner lid as a base and store it in the package.
The photo shows the kit assembled and painted.