PLG1-P06 Recessed Point Guide (for 0.6mm width)
$7.00
Skip to product information
■Product Description
Because it carves the inside of the groove, you won't make mistakes! Sheet-type scribing guide tape is now available!
Contents: GUNPRIMER Panel Line Guide 1 (Recessed Point Guide) various types
Number of guide tapes included: 120 sheets
Size variations:
Width 0.4mm (JAN: 4580610590048)
Width 0.6mm (JAN: 4580610590055)
Width 0.8mm (JAN: 4580610590062)
Width 1.0mm (JAN: 4580610590079)
*Suitable for beginners to intermediate users
This is a set of sheet-type scribing guide tapes.
The Panel Line Guide 1 series is mainly developed for beginners in scribing.
This recessed point guide is a tool for easily carving the thick, short, rectangular grooves (hereinafter referred to as recessed points) that are applied to various parts of mechanical models.
You can carve clean recessed points by simply lightly marking the area multiple times with a groove tool of the same width as the product.
Since it is difficult to make recessed points of the same length freehand, this guide tape is designed to prevent overruns (mistakes where you carve too much of the area), by carving the groove in the center of each guide tape. (The numbers on the tape indicate the length of the groove.)
One sheet is included in each product. One sheet contains
(1) 2.0mm in length, 30 pieces in total
(2) 3.0mm in length, 30 pieces in total
(3) 4.0mm in length, 30 pieces in total
(4) 5.0mm in length, 30 pieces in total
(5) in length, 30 pieces in total
A total of 120 groove guide tapes are printed on one sheet.
■Product Specifications
Manufacturer: G PARTS
Item No: PLG1-P06
Size: Width 0.6mm
JAN: 4580610590055
■Notes
*One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it.
When reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty.
【Precautions】
*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible.
PLG1-P06 Recessed Point Guide (for 0.6mm width)
$7.00
Because it carves the inside of the groove, you won't make mistakes! Sheet-type scribing guide tape is now available!
Contents: GUNPRIMER Panel Line Guide 1 (Recessed Point Guide) various types
Number of guide tapes included: 120 sheets
Size variations:
Width 0.4mm (JAN: 4580610590048)
Width 0.6mm (JAN: 4580610590055)
Width 0.8mm (JAN: 4580610590062)
Width 1.0mm (JAN: 4580610590079)
*Suitable for beginners to intermediate users
This is a set of sheet-type scribing guide tapes.
The Panel Line Guide 1 series is mainly developed for beginners in scribing.
This recessed point guide is a tool for easily carving the thick, short, rectangular grooves (hereinafter referred to as recessed points) that are applied to various parts of mechanical models.
You can carve clean recessed points by simply lightly marking the area multiple times with a groove tool of the same width as the product.
Since it is difficult to make recessed points of the same length freehand, this guide tape is designed to prevent overruns (mistakes where you carve too much of the area), by carving the groove in the center of each guide tape. (The numbers on the tape indicate the length of the groove.)
One sheet is included in each product. One sheet contains
(1) 2.0mm in length, 30 pieces in total
(2) 3.0mm in length, 30 pieces in total
(3) 4.0mm in length, 30 pieces in total
(4) 5.0mm in length, 30 pieces in total
(5) in length, 30 pieces in total
A total of 120 groove guide tapes are printed on one sheet.
■Product Specifications
Manufacturer: G PARTS
Item No: PLG1-P06
Size: Width 0.6mm
JAN: 4580610590055
■Notes
*One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it.
When reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty.
【Precautions】
*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible.