LiquidSettingDrop
Shokunin Katagi Brass Wire Hook/Handrail Processing Jig Wanira
$30.00
Skip to product information
■Product Description
Easy and clean processing from single pieces to mass production!
Just clamp and bend! Easily and neatly make U-shaped hooks and handrails!
●A product precisely processed by craftsmen with many years of experience who are well-versed in resin processing technology.
●Can be bent and used with brass wire of both 0.3 mm and 0.5 mm thickness!
●The bending width can be freely set in 1 mm increments from the commonly used 2 mm width to 12 mm width!
●You can make a beautiful U-shaped hook or handrail just by clamping and bending.
●Mass production is possible in a short time if you decide on the position of the brass wire! The finish is also uniform!
●The main body is made of UV-curing resin so it will not damage the material being bent!
●The lower base is slanted at 10° so it can be bent reliably at an angle close to 90°!
●Weighing only 6.0g, it is ultra-lightweight and can be used for long hours of work!
■Product Specifications
Manufacturer: Shimomura Alec (Platz)
Item No: AL-K199
Size: Total length approximately 65mm
Related Companies: [Planning] Shimomura Alec Co., Ltd.
[Sales] Platz Co., Ltd.
JAN: 4562256113157
Shokunin Katagi Brass Wire Hook/Handrail Processing Jig Wanira
$30.00
Shipping Calculator
Product Weight: 0.04 kg
Easy and clean processing from single pieces to mass production!
Just clamp and bend! Easily and neatly make U-shaped hooks and handrails!
●A product precisely processed by craftsmen with many years of experience who are well-versed in resin processing technology.
●Can be bent and used with brass wire of both 0.3 mm and 0.5 mm thickness!
●The bending width can be freely set in 1 mm increments from the commonly used 2 mm width to 12 mm width!
●You can make a beautiful U-shaped hook or handrail just by clamping and bending.
●Mass production is possible in a short time if you decide on the position of the brass wire! The finish is also uniform!
●The main body is made of UV-curing resin so it will not damage the material being bent!
●The lower base is slanted at 10° so it can be bent reliably at an angle close to 90°!
●Weighing only 6.0g, it is ultra-lightweight and can be used for long hours of work!
■Product Specifications
Manufacturer: Shimomura Alec (Platz)
Item No: AL-K199
Size: Total length approximately 65mm
Related Companies: [Planning] Shimomura Alec Co., Ltd.
[Sales] Platz Co., Ltd.
JAN: 4562256113157