{"title":"G PARTS","description":"","products":[{"product_id":"4580610590017","title":"PLG1-S01 straight line guide for width 0.1mm","description":"■Product Description\u003cbr\u003e\r\n No more mistakes because you carve the inside of the groove! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Straight Guide) various types\u003cbr\u003eNumber of guide tapes included: 100 sheets\u003cbr\u003eSize variations:\u003cbr\u003eFor width 0.1mm (JAN: 4580610590017)\u003cbr\u003eFor width 0.2mm (JAN: 4580610590024)\u003cbr\u003eFor width 0.3mm (JAN: 4580610590031)\u003cbr\u003e*Suitable for beginners to intermediate users\u003cbr\u003e\u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing.\u003cbr\u003e\u003cbr\u003eThis straight guide is designed to prevent overruns (mistakes where you carve beyond the intended area) and crooked lines, by carving the groove in the center of each guide tape. (The numbers indicated are the groove lengths)\u003cbr\u003e\u003cbr\u003eEach product comes with a set of three sheets.\u003cbr\u003e\u003cbr\u003eEach sheet contains the following:\u003cbr\u003e(1) 60 grooves with groove lengths of 1mm to 30mm\u003cbr\u003e(2) 20 grooves with groove lengths of 31mm to 40mm\u003cbr\u003e(3) 20 grooves with groove lengths of 41mm to 50mm\u003cbr\u003e\u003cbr\u003eA total of 100 groove guide tapes are printed on each sheet.\u003cbr\u003e\u003cbr\u003eEach guide tape also includes a guideline for determining the angle, which can be used to freely draw various guidelines. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-S01\u003cbr\u003e\r\n Size: For width 0.1mm\u003cbr\u003e\r\n JAN: 4580610590017\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408527577246,"sku":"4580610590017","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590017.jpg?v=1768594813"},{"product_id":"4580610590024","title":"PLG1-S02 straight line guide for width 0.2mm","description":"■Product Description\u003cbr\u003e\r\n No more mistakes because you carve the inside of the groove! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Straight Guide) various types\u003cbr\u003eNumber of guide tapes included: 100 sheets\u003cbr\u003eSize variations:\u003cbr\u003eFor width 0.1mm (JAN: 4580610590017)\u003cbr\u003eFor width 0.2mm (JAN: 4580610590024)\u003cbr\u003eFor width 0.3mm (JAN: 4580610590031)\u003cbr\u003e*Suitable for beginners to intermediate users\u003cbr\u003e\u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing.\u003cbr\u003e\u003cbr\u003eThis straight guide is designed to prevent overruns (mistakes where you carve beyond the intended area) and crooked lines, by carving the groove in the center of each guide tape. (The numbers indicated are the groove lengths)\u003cbr\u003e\u003cbr\u003eEach product comes with a set of three sheets.\u003cbr\u003e\u003cbr\u003eEach sheet contains the following:\u003cbr\u003e(1) 60 grooves with groove lengths of 1mm to 30mm\u003cbr\u003e(2) 20 grooves with groove lengths of 31mm to 40mm\u003cbr\u003e(3) 20 grooves with groove lengths of 41mm to 50mm\u003cbr\u003e\u003cbr\u003eA total of 100 groove guide tapes are printed on each sheet.\u003cbr\u003e\u003cbr\u003eEach guide tape also includes a guideline for determining the angle, which can be used to freely draw various guidelines. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-S02\u003cbr\u003e\r\n Size: For 0.2mm width\u003cbr\u003e\r\n JAN: 4580610590024\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408531542174,"sku":"4580610590024","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590024.jpg?v=1768594825"},{"product_id":"4580610590031","title":"Straight Line Guide (for 0.3mm Width)","description":"■Product Description\u003cbr\u003e\r\n No more mistakes because you carve the inside of the groove! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Straight Guide) various types\u003cbr\u003eNumber of guide tapes included: 100 sheets\u003cbr\u003eSize variations:\u003cbr\u003eFor width 0.1mm (JAN: 4580610590017)\u003cbr\u003eFor width 0.2mm (JAN: 4580610590024)\u003cbr\u003eFor width 0.3mm (JAN: 4580610590031)\u003cbr\u003e*Suitable for beginners to intermediate users\u003cbr\u003e\u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing.\u003cbr\u003e\u003cbr\u003eThis straight guide is designed to prevent overruns (mistakes where you carve beyond the intended area) and crooked lines, by carving the groove in the center of each guide tape. (The numbers indicated are the groove lengths)\u003cbr\u003e\u003cbr\u003eEach product comes with a set of three sheets.\u003cbr\u003e\u003cbr\u003eEach sheet contains the following:\u003cbr\u003e(1) 60 grooves with groove lengths of 1mm to 30mm\u003cbr\u003e(2) 20 grooves with groove lengths of 31mm to 40mm\u003cbr\u003e(3) 20 grooves with groove lengths of 41mm to 50mm\u003cbr\u003e\u003cbr\u003eA total of 100 groove guide tapes are printed on each sheet.\u003cbr\u003e\u003cbr\u003eEach guide tape also includes a guideline for determining the angle, which can be used to freely draw various guidelines. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-S03\u003cbr\u003e\r\n Size: For 0.3mm width\u003cbr\u003e\r\n JAN: 4580610590031\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408531673246,"sku":"4580610590031","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590031.jpg?v=1768594838"},{"product_id":"4580610590048","title":"PLG1-P04 point of contact guide for width 0.4mm","description":"■Product Description\u003cbr\u003e\r\n Because it carves the inside of the groove, you won't make mistakes! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Recessed Point Guide) various types\u003cbr\u003eNumber of guide tapes included: 120 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.4mm (JAN: 4580610590048)\u003cbr\u003eWidth 0.6mm (JAN: 4580610590055)\u003cbr\u003eWidth 0.8mm (JAN: 4580610590062)\u003cbr\u003eWidth 1.0mm (JAN: 4580610590079)\u003cbr\u003e*Suitable for beginners to intermediate users\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing. \u003cbr\u003e\u003cbr\u003eThis recessed point guide is a tool for easily carving the thick, short, rectangular grooves (hereinafter referred to as recessed points) that are applied to various parts of mechanical models.\u003cbr\u003eYou can carve clean recessed points by simply lightly marking the area multiple times with a groove tool of the same width as the product.\u003cbr\u003e\u003cbr\u003eSince it is difficult to make recessed points of the same length freehand, this guide tape is designed to prevent overruns (mistakes where you carve too much of the area), by carving the groove in the center of each guide tape. (The numbers on the tape indicate the length of the groove.)\u003cbr\u003e\u003cbr\u003eOne sheet is included in each product. One sheet contains\u003cbr\u003e\u003cbr\u003e(1) 2.0mm in length, 30 pieces in total\u003cbr\u003e(2) 3.0mm in length, 30 pieces in total\u003cbr\u003e(3) 4.0mm in length, 30 pieces in total\u003cbr\u003e(4) 5.0mm in length, 30 pieces in total\u003cbr\u003e(5) in length, 30 pieces in total\u003cbr\u003e\u003cbr\u003eA total of 120 groove guide tapes are printed on one sheet. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-P04\u003cbr\u003e\r\n Size: Width 0.4mm\u003cbr\u003e\r\n JAN: 4580610590048\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e[Precautions]\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408531935390,"sku":"4580610590048","price":682.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590048.jpg?v=1768594853"},{"product_id":"4580610590055","title":"PLG1-P06 Recessed Point Guide (for 0.6mm width)","description":"■Product Description\u003cbr\u003e\r\n Because it carves the inside of the groove, you won't make mistakes! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Recessed Point Guide) various types\u003cbr\u003eNumber of guide tapes included: 120 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.4mm (JAN: 4580610590048)\u003cbr\u003eWidth 0.6mm (JAN: 4580610590055)\u003cbr\u003eWidth 0.8mm (JAN: 4580610590062)\u003cbr\u003eWidth 1.0mm (JAN: 4580610590079)\u003cbr\u003e*Suitable for beginners to intermediate users\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing. \u003cbr\u003e\u003cbr\u003eThis recessed point guide is a tool for easily carving the thick, short, rectangular grooves (hereinafter referred to as recessed points) that are applied to various parts of mechanical models.\u003cbr\u003eYou can carve clean recessed points by simply lightly marking the area multiple times with a groove tool of the same width as the product.\u003cbr\u003e\u003cbr\u003eSince it is difficult to make recessed points of the same length freehand, this guide tape is designed to prevent overruns (mistakes where you carve too much of the area), by carving the groove in the center of each guide tape. (The numbers on the tape indicate the length of the groove.)\u003cbr\u003e\u003cbr\u003eOne sheet is included in each product. One sheet contains\u003cbr\u003e\u003cbr\u003e(1) 2.0mm in length, 30 pieces in total\u003cbr\u003e(2) 3.0mm in length, 30 pieces in total\u003cbr\u003e(3) 4.0mm in length, 30 pieces in total\u003cbr\u003e(4) 5.0mm in length, 30 pieces in total\u003cbr\u003e(5) in length, 30 pieces in total\u003cbr\u003e\u003cbr\u003eA total of 120 groove guide tapes are printed on one sheet. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-P06\u003cbr\u003e\r\n Size: Width 0.6mm\u003cbr\u003e\r\n JAN: 4580610590055\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532033694,"sku":"4580610590055","price":682.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590048_d2ad9fe1-e848-4fd0-b5e1-7fe1accceefd.jpg?v=1768594867"},{"product_id":"4580610590062","title":"Concave Point Guide (for 0.8mm Width)","description":"■Product Description\u003cbr\u003e\r\n Because it carves the inside of the groove, you won't make mistakes! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Recessed Point Guide) various types\u003cbr\u003eNumber of guide tapes included: 120 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.4mm (JAN: 4580610590048)\u003cbr\u003eWidth 0.6mm (JAN: 4580610590055)\u003cbr\u003eWidth 0.8mm (JAN: 4580610590062)\u003cbr\u003eWidth 1.0mm (JAN: 4580610590079)\u003cbr\u003e*Suitable for beginners to intermediate users\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing. \u003cbr\u003e\u003cbr\u003eThis recessed point guide is a tool for easily carving the thick, short, rectangular grooves (hereinafter referred to as recessed points) that are applied to various parts of mechanical models.\u003cbr\u003eYou can carve clean recessed points by simply lightly marking the area multiple times with a groove tool of the same width as the product.\u003cbr\u003e\u003cbr\u003eSince it is difficult to make recessed points of the same length freehand, this guide tape is designed to prevent overruns (mistakes where you carve too much of the area), by carving the groove in the center of each guide tape. (The numbers on the tape indicate the length of the groove.)\u003cbr\u003e\u003cbr\u003eOne sheet is included in each product. One sheet contains\u003cbr\u003e\u003cbr\u003e(1) 2.0mm in length, 30 pieces in total\u003cbr\u003e(2) 3.0mm in length, 30 pieces in total\u003cbr\u003e(3) 4.0mm in length, 30 pieces in total\u003cbr\u003e(4) 5.0mm in length, 30 pieces in total\u003cbr\u003e(5) in length, 30 pieces in total\u003cbr\u003e\u003cbr\u003eA total of 120 groove guide tapes are printed on one sheet. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-P08\u003cbr\u003e\r\n Size: Width 0.8mm\u003cbr\u003e\r\n JAN: 4580610590062\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532099230,"sku":"4580610590062","price":682.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590048_f88fd76c-7abb-48e4-a159-11df78fd9435.jpg?v=1768594882"},{"product_id":"4580610590079","title":"Concave Point Guide (for 1.0mm Width)","description":"■Product Description\u003cbr\u003e\r\n Because it carves the inside of the groove, you won't make mistakes! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Recessed Point Guide) various types\u003cbr\u003eNumber of guide tapes included: 120 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.4mm (JAN: 4580610590048)\u003cbr\u003eWidth 0.6mm (JAN: 4580610590055)\u003cbr\u003eWidth 0.8mm (JAN: 4580610590062)\u003cbr\u003eWidth 1.0mm (JAN: 4580610590079)\u003cbr\u003e*Suitable for beginners to intermediate users\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing. \u003cbr\u003e\u003cbr\u003eThis recessed point guide is a tool for easily carving the thick, short, rectangular grooves (hereinafter referred to as recessed points) that are applied to various parts of mechanical models.\u003cbr\u003eYou can carve clean recessed points by simply lightly marking the area multiple times with a groove tool of the same width as the product.\u003cbr\u003e\u003cbr\u003eSince it is difficult to make recessed points of the same length freehand, this guide tape is designed to prevent overruns (mistakes where you carve too much of the area), by carving the groove in the center of each guide tape. (The numbers on the tape indicate the length of the groove.)\u003cbr\u003e\u003cbr\u003eOne sheet is included in each product. One sheet contains\u003cbr\u003e\u003cbr\u003e(1) 2.0mm in length, 30 pieces in total\u003cbr\u003e(2) 3.0mm in length, 30 pieces in total\u003cbr\u003e(3) 4.0mm in length, 30 pieces in total\u003cbr\u003e(4) 5.0mm in length, 30 pieces in total\u003cbr\u003e(5) in length, 30 pieces in total\u003cbr\u003e\u003cbr\u003eA total of 120 groove guide tapes are printed on one sheet. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-P10\u003cbr\u003e\r\n Size: Width 1.0mm\u003cbr\u003e\r\n JAN: 4580610590079\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532263070,"sku":"4580610590079","price":682.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590048_235f25b3-112b-435d-bf2d-45f5feb7d2e0.jpg?v=1768594895"},{"product_id":"4580610590086","title":"PLG1-C01 curved line guide for width 0.1mm)","description":"■Product Description\u003cbr\u003e\r\n Because you carve the inside of the groove, you won't make mistakes! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Curved Line Guide) various types\u003cbr\u003eNumber of guide tapes included: 75 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.1mm (JAN: 4580610590086)\u003cbr\u003eWidth 0.2mm (JAN: 4580610590093)\u003cbr\u003eWidth 0.3mm (JAN: 4580610590109)\u003cbr\u003eGroove (length of the part to be engraved): 25mm (common to all types)\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing. \u003cbr\u003e\u003cbr\u003eThis curved line guide is a tool for accurately engraving straight lines (hereinafter referred to as curved lines) on mechanical models with many curved surfaces. \u003cbr\u003e\u003cbr\u003eWhen guide tape is applied to curved surfaces, the edges may peel off or shift during work. This guide tape prevents the tape from peeling off, which can lead to such mistakes, and, like other panel line guides, prevents overruns (the mistake of engraving beyond the intended area). \u003cbr\u003e\u003cbr\u003eEach product comes with one sheet containing 75 engraving guide tapes. \u003cbr\u003eReinforcement tape is also included to prevent peeling on sharp curves and edges. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-C01\u003cbr\u003e\r\n Size: Width 0.1mm\u003cbr\u003e\r\n JAN: 4580610590086\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532328606,"sku":"4580610590086","price":748.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590086.jpg?v=1768594912"},{"product_id":"4580610590093","title":"PLG1-C02 curved line guide for width 0.2mm)","description":"■Product Description\u003cbr\u003e\r\n Because you carve the inside of the groove, you won't make mistakes! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Curved Line Guide) various types\u003cbr\u003eNumber of guide tapes included: 75 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.1mm (JAN: 4580610590086)\u003cbr\u003eWidth 0.2mm (JAN: 4580610590093)\u003cbr\u003eWidth 0.3mm (JAN: 4580610590109)\u003cbr\u003eGroove (length of the part to be engraved): 25mm (common to all types)\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing. \u003cbr\u003e\u003cbr\u003eThis curved line guide is a tool for accurately engraving straight lines (hereinafter referred to as curved lines) on mechanical models with many curved surfaces. \u003cbr\u003e\u003cbr\u003eWhen guide tape is applied to curved surfaces, the edges may peel off or shift during work. This guide tape prevents the tape from peeling off, which can lead to such mistakes, and, like other panel line guides, prevents overruns (the mistake of engraving beyond the intended area). \u003cbr\u003e\u003cbr\u003eEach product comes with one sheet containing 75 engraving guide tapes. \u003cbr\u003eReinforcement tape is also included to prevent peeling on sharp curves and edges. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-C02\u003cbr\u003e\r\n Size: Width 0.2mm\u003cbr\u003e\r\n JAN: 4580610590093\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532394142,"sku":"4580610590093","price":748.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590093.jpg?v=1768594928"},{"product_id":"4580610590109","title":"Curved Line Guide (for 0.3mm Width)","description":"■Product Description\u003cbr\u003e\r\n Because you carve the inside of the groove, you won't make mistakes! Sheet-type scribing guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Curved Line Guide) various types\u003cbr\u003eNumber of guide tapes included: 75 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.1mm (JAN: 4580610590086)\u003cbr\u003eWidth 0.2mm (JAN: 4580610590093)\u003cbr\u003eWidth 0.3mm (JAN: 4580610590109)\u003cbr\u003eGroove (length of the part to be engraved): 25mm (common to all types)\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type scribing guide tapes.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in scribing. \u003cbr\u003e\u003cbr\u003eThis curved line guide is a tool for accurately engraving straight lines (hereinafter referred to as curved lines) on mechanical models with many curved surfaces. \u003cbr\u003e\u003cbr\u003eWhen guide tape is applied to curved surfaces, the edges may peel off or shift during work. This guide tape prevents the tape from peeling off, which can lead to such mistakes, and, like other panel line guides, prevents overruns (the mistake of engraving beyond the intended area). \u003cbr\u003e\u003cbr\u003eEach product comes with one sheet containing 75 engraving guide tapes. \u003cbr\u003eReinforcement tape is also included to prevent peeling on sharp curves and edges. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-C03\u003cbr\u003e\r\n Size: Width 0.3mm\u003cbr\u003e\r\n JAN: 4580610590109\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532426910,"sku":"4580610590109","price":748.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590109.jpg?v=1768594945"},{"product_id":"4580610590116","title":"PLG1-PT01 pattern No. 1 is 0.1mm wide","description":"■Product Description\u003cbr\u003e\r\n No mistakes because you carve the inside of the groove! Sheet-type panel line guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Pattern No. 1) various types\u003cbr\u003eNumber of guide tapes included: 96 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.1mm (JAN: 4580610590116)\u003cbr\u003eWidth 0.2mm (JAN: 4580610590123)\u003cbr\u003eWidth 0.3mm (JAN: 4580610590130)\u003cbr\u003e\u003cbr\u003eGroove width: 28mm (common to all types)\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type panel line guide tape.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in panel line engraving.\u003cbr\u003e\u003cbr\u003eThis pattern guide is a tool for accurately and easily engraving broken-line straight panel lines on mechanical models. \u003cbr\u003e\u003cbr\u003eNormally, when reproducing these panel lines using guide tape, you would cut the guide tape into small pieces, stick them in several places, and then engrave. This is very tedious, and engraving the same panel lines symmetrically on the sides of parts such as legs is extremely difficult. \u003cbr\u003e\u003cbr\u003eThis guide tape simplifies and streamlines this tedious process, and like other panel line guides, it reliably prevents overruns (the mistake of engraving beyond the intended area). \u003cbr\u003e\u003cbr\u003eIt is also slightly softer than Gannet's panel line guide tapes (various types), adheres firmly even to slightly curved surfaces, and leaves no adhesive residue when removed. \u003cbr\u003e\u003cbr\u003eEach product contains a set of four sheets. Each sheet contains:\u003cbr\u003e\u003cbr\u003e(1) 12 pieces each of 2mm and 3mm step lengths, total 24 pieces\u003cbr\u003e(2) 12 pieces each of 2mm and 3mm step lengths in the opposite direction to (1), total 24 pieces\u003cbr\u003e(3) 12 pieces each of 4mm and 5mm step lengths, total 24 pieces\u003cbr\u003e(4) 12 pieces each of 4mm and 5mm step lengths in the opposite direction to (1), total 24 pieces\u003cbr\u003e\u003cbr\u003eA total of 96 scribed guide tapes are included. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-PT01\u003cbr\u003e\r\n Size: Width 0.1mm Groove width: 28mm\u003cbr\u003e\r\n JAN: 4580610590116\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532459678,"sku":"4580610590116","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590116.jpg?v=1768594959"},{"product_id":"4580610590123","title":"PLG1-PT02 pattern No. 1 is 0.2mm wide.","description":"■Product Description\u003cbr\u003e\r\n No mistakes because you carve the inside of the groove! Sheet-type panel line guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Pattern No. 1) various types\u003cbr\u003eNumber of guide tapes included: 96 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.1mm (JAN: 4580610590116)\u003cbr\u003eWidth 0.2mm (JAN: 4580610590123)\u003cbr\u003eWidth 0.3mm (JAN: 4580610590130)\u003cbr\u003e\u003cbr\u003eGroove width: 28mm (common to all types)\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type panel line guide tape.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in panel line engraving.\u003cbr\u003e\u003cbr\u003eThis pattern guide is a tool for accurately and easily engraving broken-line straight panel lines on mechanical models. \u003cbr\u003e\u003cbr\u003eNormally, when reproducing these panel lines using guide tape, you would cut the guide tape into small pieces, stick them in several places, and then engrave. This is very tedious, and engraving the same panel lines symmetrically on the sides of parts such as legs is extremely difficult. \u003cbr\u003e\u003cbr\u003eThis guide tape simplifies and streamlines this tedious process, and like other panel line guides, it reliably prevents overruns (the mistake of engraving beyond the intended area). \u003cbr\u003e\u003cbr\u003eIt is also slightly softer than Gannet's panel line guide tapes (various types), adheres firmly even to slightly curved surfaces, and leaves no adhesive residue when removed. \u003cbr\u003e\u003cbr\u003eEach product contains a set of four sheets. Each sheet contains:\u003cbr\u003e\u003cbr\u003e(1) 12 pieces each of 2mm and 3mm step lengths, total 24 pieces\u003cbr\u003e(2) 12 pieces each of 2mm and 3mm step lengths in the opposite direction to (1), total 24 pieces\u003cbr\u003e(3) 12 pieces each of 4mm and 5mm step lengths, total 24 pieces\u003cbr\u003e(4) 12 pieces each of 4mm and 5mm step lengths in the opposite direction to (1), total 24 pieces\u003cbr\u003e\u003cbr\u003eA total of 96 scribed guide tapes are included. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-PT02\u003cbr\u003e\r\n Size: Width 0.2mm Groove width: 28mm\u003cbr\u003e\r\n JAN: 4580610590123\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532492446,"sku":"4580610590123","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590123.jpg?v=1768594976"},{"product_id":"4580610590130","title":"Pattern No.1 (for 0.3mm Width)","description":"■Product Description\u003cbr\u003e\r\n No mistakes because you carve the inside of the groove! Sheet-type panel line guide tape is now available! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Panel Line Guide 1 (Pattern No. 1) various types\u003cbr\u003eNumber of guide tapes included: 96 sheets\u003cbr\u003e\u003cbr\u003eSize variations:\u003cbr\u003eWidth 0.1mm (JAN: 4580610590116)\u003cbr\u003eWidth 0.2mm (JAN: 4580610590123)\u003cbr\u003eWidth 0.3mm (JAN: 4580610590130)\u003cbr\u003e\u003cbr\u003eGroove width: 28mm (common to all types)\u003cbr\u003e \u003cbr\u003eThis is a set of sheet-type panel line guide tape.\u003cbr\u003eThe Panel Line Guide 1 series is mainly developed for beginners in panel line engraving.\u003cbr\u003e\u003cbr\u003eThis pattern guide is a tool for accurately and easily engraving broken-line straight panel lines on mechanical models. \u003cbr\u003e\u003cbr\u003eNormally, when reproducing these panel lines using guide tape, you would cut the guide tape into small pieces, stick them in several places, and then engrave. This is very tedious, and engraving the same panel lines symmetrically on the sides of parts such as legs is extremely difficult. \u003cbr\u003e\u003cbr\u003eThis guide tape simplifies and streamlines this tedious process, and like other panel line guides, it reliably prevents overruns (the mistake of engraving beyond the intended area). \u003cbr\u003e\u003cbr\u003eIt is also slightly softer than Gannet's panel line guide tapes (various types), adheres firmly even to slightly curved surfaces, and leaves no adhesive residue when removed. \u003cbr\u003e\u003cbr\u003eEach product contains a set of four sheets. Each sheet contains:\u003cbr\u003e\u003cbr\u003e(1) 12 pieces each of 2mm and 3mm step lengths, total 24 pieces\u003cbr\u003e(2) 12 pieces each of 2mm and 3mm step lengths in the opposite direction to (1), total 24 pieces\u003cbr\u003e(3) 12 pieces each of 4mm and 5mm step lengths, total 24 pieces\u003cbr\u003e(4) 12 pieces each of 4mm and 5mm step lengths in the opposite direction to (1), total 24 pieces\u003cbr\u003e\u003cbr\u003eA total of 96 scribed guide tapes are included. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: PLG1-PT03\u003cbr\u003e\r\n Size: Width 0.3mm Groove width: 28mm\u003cbr\u003e\r\n JAN: 4580610590130\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *One guide sticker can be reused several times if it is not heavily soiled or has dust, oil, etc. attached to it. \u003cbr\u003eWhen reusing, remove any residue from the engraved lines with a clean brush as soon as it gets dirty. \u003cbr\u003e\u003cbr\u003e【Precautions】\u003cbr\u003e*Make sure to remove any oil or dust from the surface before applying. Also, when cutting, be careful not to touch the adhesive surface with your fingertips as much as possible. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532525214,"sku":"4580610590130","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590130.jpg?v=1768594991"},{"product_id":"4580610590253","title":"Gate Remover set (for Beginners and Above)","description":"■Product Description\u003cbr\u003e\r\n Easily and cleanly remove gates from plastic models! Complete gate removal and surface treatment with a special reinforced glass polishing tool that is less likely to damage parts and support material! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Gate Remover Set\u003cbr\u003e*Suitable for beginners to advanced users\u003cbr\u003e(JAN: 4580610590253)\u003cbr\u003eFor gate removal and surface treatment of plastic models\u003cbr\u003e\u003cbr\u003eThe Gate Remover Set is a revolutionary gate removal tool set that combines three types of polishing materials in one set, changing the conventional concept of gate removal. It is also recommended for removing gates from clear parts, which are troublesome and difficult to do cleanly. \u003cbr\u003e\u003cbr\u003eThere are three types of polishing tools: 'RASER', 'BALANCER', and 'RECOVER'. You can use each of them to perform a series of tasks from gate removal to surface treatment according to your preference. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: R-GRS\u003cbr\u003e\r\n Contents\/Accessories: Set contents:\u003cbr\u003e■RASER v1.5 (Laser ver.1.5) x 1\u003cbr\u003eMaterial: Tempered glass\u003cbr\u003eSize: 90mm x 11mm x 3.5mm\u003cbr\u003e■BALANCER WHITE (Balancer White) x 1\u003cbr\u003eSize: 90mm x 18mm x 15mm\u003cbr\u003e■RECOVER (Recover) x 2\u003cbr\u003eSize of one sheet: 90mm x 90mm\u003cbr\u003e■Drawer-type case (size)\u003cbr\u003e・Outer box: 200mm (length) x 135mm (width) x 30mm (height)\u003cbr\u003e・Inner box: 197mm (length) x 127mm (width) x Height 25mm\u003cbr\u003e・Storage compartment size: 180mm (length) x 110mm (width) x 13mm (depth)\u003cbr\u003e\r\n JAN: 4580610590253\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n [Precautions for use]\u003cbr\u003e*RASER does not clog, but plastic powder will adhere after polishing. If left unattended, the polishing power will decrease, so be sure to clean it with RECOVER after use and store it properly. \u003cbr\u003e\u003cbr\u003e*The polishing tools in the set can be washed with water. If they get dirty, wash them with water, dry them, and then reuse them. \u003cbr\u003e\u003cbr\u003e*Use on all types of plastic. Do not use on metal. \u003cbr\u003e\u003cbr\u003e*The dedicated case has a paper surface. Please be careful as it may be damaged if it gets wet. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532656286,"sku":"4580610590253","price":5445.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590253.jpg?v=1768595007"},{"product_id":"4580610590260","title":"Raser Origin (1 pcs)","description":"■Product Description\u003cbr\u003e\r\n This is a replacement part for the RASER, the main unit of the gate remover set. Easily and cleanly remove gates from plastic models! A specially processed tempered glass polishing tool that is less likely to damage plastic parts.\u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER RASER ORIGIN 1 piece\u003cbr\u003eJAN: 4580610590260\u003cbr\u003e*A certificate proving that it is a specially handmade product is included.\u003cbr\u003e*Suitable for beginners to advanced users\u003cbr\u003e\u003cbr\u003eThis is a replacement part for the RASER (ver.1.5), the main unit of the gate remover set. It is also recommended for removing gates from clear parts, which are troublesome and difficult to do cleanly. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: R-GR\u003cbr\u003e\r\n Size: 90mm x 11mm x 3.5mm\u003cbr\u003e\r\n Product Specifications: ◎Features of RASER\u003cbr\u003e\u003cbr\u003e◇High polishing power specialized for gate processing\u003cbr\u003e\u003cbr\u003eIt has high polishing power and can complete gate processing in a short time. Even when polishing flat parts, it does not remove material like a normal file, and is a file specialized for gate processing that is suitable for easily and cleanly removing gates and protruding parts of plastic models. \u003cbr\u003e\u003cbr\u003e◇High strength to withstand hard use\u003cbr\u003e\u003cbr\u003eThe surface of the polishing part is completely different from the teeth of a normal file, and will not chip easily even when used hard for a long period of time. \u003cbr\u003eTherefore, it can maintain high polishing power for a long period of time. Furthermore, it is manufactured through a unique process that includes manual work, and clogging can be easily removed with simple care. \u003cbr\u003e\u003cbr\u003eGate processing of clear parts is also easier than using a regular file. \u003cbr\u003e\u003cbr\u003eAlso, since there are no file marks, there is no irritation to the skin, and it will not scratch even if a child rubs it against their skin. \u003cbr\u003eIt can be used safely and semi-permanently by everyone from beginners to advanced users. \u003cbr\u003eContents\/Accessories: Set contents:\u003cbr\u003e■RASER ORIGIN x 1\u003cbr\u003eMaterial: Tempered glass\u003cbr\u003eSize: 90mm x 11mm x 3.5mm\u003cbr\u003e\r\n JAN: 4580610590260\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n [Precautions for use]\u003cbr\u003e*RASER does not clog, but plastic powder will adhere after polishing. If left unattended, the polishing power will decrease, so be sure to clean it thoroughly with RECOVER after use before storing it. \u003cbr\u003e*For use on all types of plastic. Do not use on metal. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532754590,"sku":"4580610590260","price":3300.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590260.jpg?v=1768595029"},{"product_id":"4580610590277","title":"Balancer White (3 pcs)","description":"■Product Description\u003cbr\u003e\r\n This is a set of three replacement single \"BALANCER WHITE\" parts for the gate remover set. \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER BALANCER WHITE 3-piece set\u003cbr\u003eUses: For polishing and surface treatment of plastic models\u003cbr\u003eSize: 90mm x 18mm x 15mm\u003cbr\u003eJAN: 4580610590277\u003cbr\u003e\u003cbr\u003eThis is a set of three single \"BALANCER WHITE\" polishing tools for the gate remover set. Balancers are consumables, so please use this as a replacement when the polishing effect wears off. \u003cbr\u003e\u003cbr\u003eThis product is composed of two sides: a \"sandpaper side\" for polishing to create a fine matte finish and a \"shiner side\" for polishing to a glossy finish. After polishing the gate area with RASER, you can evenly blend the surface texture of the entire part. \u003cbr\u003e\u003cbr\u003eYou can express various textures such as matte, semi-gloss, and gloss to suit your preference. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: RB\u003cbr\u003e\r\n Size: 90mm x 18mm x 15mm\u003cbr\u003e\r\n Contents\/Accessories: Contents: GUNPRIMER BALANCER WHITE 3-piece set\u003cbr\u003e\r\n JAN: 4580610590277\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n [Precautions for Use]\u003cbr\u003e*Can be washed with water. If it gets dirty, wash it with water and dry it before reuse. \u003cbr\u003e*Use on all types of plastic. Do not use on metal. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532820126,"sku":"4580610590277","price":660.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590277.jpg?v=1768595041"},{"product_id":"4580610590291","title":"Recover 10.8mm x 360mm x (2 pcs) Set","description":"■Product Description\u003cbr\u003e\r\n Replacement 2-piece set of 'RECOVER' for the gate remover set. \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER RECOVER 2-piece set\u003cbr\u003eUses: For polishing and surface treatment of plastic models\u003cbr\u003eSize: Approx. 10.8mm x Approx. 360mm (2 pieces)\u003cbr\u003eJAN: 4580610590291\u003cbr\u003e\u003cbr\u003eThis is a replacement 2-piece set of 'RECOVER' polishing tool for the gate remover set. It contains two long polishing cloths, equivalent to about 8 RECOVER cloths in total for the gate remover set. \u003cbr\u003e\u003cbr\u003eRestores the surface texture of plastic after treatment. Use the \"black\" side. \u003cbr\u003eWhen surface treatment is done with high-grit sandpaper of 1000 or higher, fine scratches and polishing residue remain on the surface, but RECOVER is a special material product that can remove these and restore the original surface texture of the plastic. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: R-R1\u003cbr\u003e\r\n Size: Approx. 10.8mm x Approx. 360mm (2 sheets)\u003cbr\u003e\r\n Contents\/Accessories: Contents: GUNPRIMER RECOVER 2-piece set\u003cbr\u003e\r\n JAN: 4580610590291\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n [Precautions for Use]\u003cbr\u003e*Can be washed with water. If it gets dirty, wash it with water and dry it before reuse.\u003cbr\u003e*Use on all types of plastic. Do not use on metal. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408532852894,"sku":"4580610590291","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590291.jpg?v=1768595054"},{"product_id":"4580610590468","title":"R-GR-P1 GUNPRIMER RASER PLUS","description":"■Product Description\u003cbr\u003e\r\n Makes gate removal on plastic models super easy and clean! This is an enhanced version of \"RASER,\" a specially processed tempered glass polishing tool that is less likely to damage plastic parts! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER RASER PLUS (Standard Edition) 1 piece\u003cbr\u003eMaterial: Tempered glass\u003cbr\u003eSize: 20mm x 65mm x 5mm thick\u003cbr\u003e*A certificate proving that it is a specially handmade product is included. \u003cbr\u003e*Suitable for beginners to advanced users\u003cbr\u003eJAN: 4580610590468\u003cbr\u003e\u003cbr\u003eThis is a tempered glass file specifically for gate removal, with enhanced grinding capabilities compared to the main body of the gate remover set, \"RASER.\" \u003cbr\u003e\u003cbr\u003eCompared to the conventional RASER v1.5, the grinding power has been greatly increased, and even large gates can be processed in a shorter time than with the conventional product. \u003cbr\u003e\u003cbr\u003eIn addition to the gates on regular plastic parts, it is also recommended for processing the gates on clear parts, which are troublesome to process neatly, and for processing the seams on older kits where the seams are large. Please use it in conjunction with conventional types depending on the size of the gates and seams. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: R-GR-P1\u003cbr\u003e\r\n Product Specifications: ◎Features of RASER PLUS\u003cbr\u003e\u003cbr\u003e◇High polishing power to process even large gates in a short time\u003cbr\u003e\u003cbr\u003eGate processing can be completed in a shorter time than conventional types. Even when polishing flat surfaces, it does not remove material like a regular file. This file is suitable for easily and neatly sanding down gates and noticeable seam areas on plastic models. \u003cbr\u003e\u003cbr\u003e◇High strength to withstand heavy use\u003cbr\u003e\u003cbr\u003eThe surface of the polishing part is completely different from the teeth of a normal file, and will not chip easily even with heavy use over a long period of time.\u003cbr\u003eTherefore, it can maintain high polishing power for a long period of time.In addition, it is manufactured through several unique processes that include manual work, and clogging can be removed with simple care.\u003cbr\u003e\u003cbr\u003eGate processing of clear parts is also easier than using a normal file.\u003cbr\u003e\u003cbr\u003eAlso, since there are no file marks, it does not irritate the skin, and will not scratch even if a child rubs it against their skin.\u003cbr\u003eIt can be used safely and semi-permanently by everyone from beginners to advanced users.\u003cbr\u003e\r\n JAN: 4580610590468\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n [Precautions for use]\u003cbr\u003e※RASER does not clog, but plastic powder will adhere after polishing. If left unattended, the polishing power will decrease, so please wash it with water or clean it with RECOVER after use before storing it. \u003cbr\u003e*For use on all types of plastic. Do not use on metal. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408533016734,"sku":"4580610590468","price":3630.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590468.jpg?v=1768595074"},{"product_id":"4580610590574","title":"Joint Guard R","description":"■Product Description\u003cbr\u003e\r\n This is a renewed version of \"Joint Guard,\" a special reinforcement tape that can easily reinforce loose joints and movable parts of mecha models and articulated figures, with improved material and function! \u003cbr\u003e\u003cbr\u003eThe material has been changed from the conventional version to PET, making it more flexible and less likely to tear when inserted or moved. In addition, fold lines have been added to each tape, making it easier to bend and apply to movable parts. The product size and the number of tapes shown are the same as the conventional product at 1,054 pieces, and they are cut into strips in 6 sizes to match various sizes of shafts and ball joints. \u003cbr\u003e\u003cbr\u003eIt is also easy to repair models and figures displayed at home, as well as to repair them on the spot at exhibition venues, etc.\u003cbr\u003e\u003cbr\u003e【How to Use】\u003cbr\u003e（1）Select a tape that is large enough to cover about 2\/3 of the entire loosened part and apply it. \u003cbr\u003e（2）If necessary, use 1 to 3 pieces overlapping depending on the degree of looseness. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: JG-RE1-A1\u003cbr\u003e\r\n Size: Approx. 105 x 175 mm\u003cbr\u003e\r\n Number of parts: 1,054 pieces\u003cbr\u003e\r\n Product specifications: Tape color: Light gray\u003cbr\u003e\r\n JAN: 4580610590574\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46408567390366,"sku":"4580610590574","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590574.jpg?v=1768596614"},{"product_id":"4580610590284","title":"Balancer Gray (set of 3)","description":"■Product Description\u003cbr\u003e\r\n Solves the troublesome surface treatment before painting in one go! A sister product to 'BALANCER WHITE', with fine sandpaper equivalent to 2000 grit attached to both sides of a thick sponge! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER BALANCER GRAY 3-piece set\u003cbr\u003eUses: For polishing and surface treatment of plastic models\u003cbr\u003eSize: 90mm x 18mm x 15mm\u003cbr\u003eJAN: 4580610590284\u003cbr\u003e\u003cbr\u003eThis is a single replacement part for the polishing tool 'BALANCER GRAY' from the RASER THE BLACK SP set. As it is a consumable item, please use it as a replacement when the polishing effect has worn off. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: RB-G1\u003cbr\u003e\r\n JAN: 4580610590284\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46409565405342,"sku":"4580610590284","price":671.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590284.jpg?v=1768630454"},{"product_id":"4580610590437","title":"Sand Loop Flat Starter Set (Set of 4 Files + 1 Mini Handle)","description":"■Product Description\u003cbr\u003e\r\n Efficiently perform surface treatment and surface finishing work! \u003cbr\u003eThis surface treatment starter set includes all types of sand loops and an easy-to-handle handle! \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: SL-4S\u003cbr\u003e\r\n JAN: 4580610590437\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46409565438110,"sku":"4580610590437","price":2200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590437.jpg?v=1768630459"},{"product_id":"4580610590444","title":"SL-MH-G1 Sandloop flat mini-handler","description":"■Product Description\u003cbr\u003e\r\n This is a single mini handle for the Sandloop Flat 4-set. Perfect for those who need a handle for each grit size! \u003cbr\u003e\u003cbr\u003eContents: GUNPRIMER Sandloop Flat Mini Handle\u003cbr\u003ePurpose: For attaching and fixing Sandloop Flat\u003cbr\u003e\u003cbr\u003e*Sandloop Flat is not included, so you cannot file with this product alone. Please purchase Sandloop various types separately. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: SL-MH-G1\u003cbr\u003e\r\n JAN: 4580610590444\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46409565667486,"sku":"4580610590444","price":1100.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590444.jpg?v=1768630463"},{"product_id":"4580610590604","title":"Balancer White 3-Piece Set with Gate Remover","description":"■Product Description\u003cbr\u003e\r\n A popular polishing tool set that makes it easy and clean to remove gates from plastic models, even for beginners, with three types of polishing tools! \u003cbr\u003e【R-GRS】\"Bonus Included\" Gate Remover Set\u003cbr\u003e\u003cbr\u003eThe \"Gate Remover Set\" is an innovative gate removal tool set that includes three types of polishing materials in one set. \u003cbr\u003e\u003cbr\u003eThanks to your support, it has been 7 years since its release and has become a staple product that continues to be used by many customers. \u003cbr\u003e\u003cbr\u003eThis time, with the cooperation of the manufacturer, we have prepared a \"Bonus Included Set\" that comes with \"Balancer White (3-piece set)\", which is the most frequently used and most popular item sold individually, as a promotion to encourage first-time customers to try it out. \u003cbr\u003e\u003cbr\u003e\u003cGate Remover Set Contents\u003e \u003cbr\u003e\u003cbr\u003e●Laser Origin x 1\u003cbr\u003e●Balancer White x 1\u003cbr\u003e●Recover x 2\u003cbr\u003e●Case\u003cbr\u003e\u003cbr\u003eBonus: Balancer White (3 pieces) x 1 set\u003cbr\u003eRegular price 600 yen (660 yen including tax)\u003cbr\u003e\u003cbr\u003e(1) Laser Origin, a polishing material made of reinforced glass manufactured using a special process\u003cbr\u003e\u003cbr\u003e(2) Balancer White, composed of two sides: a sandpaper side for creating a fine matte finish and a shiner side for polishing to a high gloss\u003cbr\u003e\u003cbr\u003e(3) Recover, a special material for restoring the surface-treated parts to the original surface texture of plastic\u003cbr\u003e\u003cbr\u003eBy using (1) to (3) in combination, even beginners can easily and very cleanly perform a series of tasks from gate removal to surface treatment.\u003cbr\u003e\u003cbr\u003eThe package also comes as a drawer-type tool case for storage, allowing you to store it together with various other tools. Japanese manual included. \u003cbr\u003e\u003cbr\u003e*The price of the set with bonus items remains the same as before; only the JAN code has been changed. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: G PARTS\u003cbr\u003e\r\n Item No: R-GRS\u003cbr\u003e\r\n JAN: 4580610590604\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"gparts","offers":[{"title":"Default Title","offer_id":46615383310494,"sku":"4580610590604","price":5445.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580610590604.webp?v=1773772316"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/collections\/gparts.webp?v=1768805254","url":"https:\/\/tsurumai-hobby.com\/collections\/vendor-gparts.oembed","provider":"TSURUMAI HOBBY","version":"1.0","type":"link"}