{"title":"Patlabor","description":"It's the story of a group of teenagers struggling and growing up in a world where industrial robots like Ravers are being used in crime, where they're being assigned as patrol crews by the police to fight them.","products":[{"product_id":"4580416927215","title":"1\/35 Robo-Dou Griffon (Patlabor) (Reissue)","description":"■ Description\u003cbr\u003e\nThere's a one-third-scale glyph from the RoboCop series!\u003cbr\u003e\nIt's more than the animated series \"Moving Police Patrol\", which has been popular for years.・Enterprise's experimental prototype lever \"Griphon\" comes from three-zero's \"robot lane\". The \"robot lane\" is a movable figure of 1\/35 scale (about 24.4 cm in total height), using ABS, PVC, POM, zinc alloy dicasts, and fabric. The zinc alloy dicasts use a movable frame, which allows for a total of about 60 movable points on the entire body. Using the elbow, waist, thigh, and knee covers, the robot is able to reconstruct and move the glyphon's silt.・In addition, the headpieces of the glyph can be lifted up each collarpiece to look inside the cockpit. The distinctive giant wings have four moving points on each side and can be positioned in a variety of ways.\u003cbr\u003e\n\u003cbr\u003e\n■ Specifications\u003cbr\u003e\nMaker：GOOD SMILE COMPANY\u003cbr\u003e\nSize：Total height: about 24.4 cm.\u003cbr\u003e\nProduct Specifications：ABS \u0026amp;PVC \u0026amp;POM \u0026amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp\u003cbr\u003e\nContents \/ Accessories：Accessories: exchanged handcuff parts, four against four, fists against one, open hands against one, grasping hands against one, punchers against one, pilot figures against badrinat halchand, robotic action stand.\u003cbr\u003e\nCopyright：It's all right.\u003cbr\u003e\nTitle：It's a robot, a Griffon.\u003cbr\u003e\nSculptor：The prototype is three zero.\u003cbr\u003e\nRelease Date：Re-sale: September 2024 release: delayed: November 2024 delayed: January 2025.\u003cbr\u003e\nScale：1\/35\u003cbr\u003e\nJAN：4580416927215\u003cbr\u003e\n\u003cbr\u003e\n■ Notes\u003cbr\u003e\nThe pictures you post may be slightly different from the actual product.\u003cbr\u003e\nThe painting of the product varies slightly from one product to another, so the coloring process is manual.\u003cbr\u003e\nIt's the nature of the paint, and sometimes the paint isn't completely dry when it opens.\u003cbr\u003e\nIf it's not dry, put it in a ventilated, shady room for two or three days, and then make sure the paint is dry, and then touch it.\u003cbr\u003e\nIf it's used in a non-drying state, it could cause discoloration or fingerprinting.\u003cbr\u003e\n\u003cbr\u003e","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46407529005214,"sku":"4580416927215","price":28800.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580416924832.jpg?v=1768557248"},{"product_id":"4571587310678","title":"1\/35 Patlabor: AV-98 Ingram Unit 1 Alphonse Theatrical Version Soft Vinyl Kit (Reissue Ver.)","description":"\u003cp\u003e■ Description\u003cbr\u003ePatlabor has progressed from comics to OVAs and theatrical films, and as figures continue to be produced, the technology used to create them in soft vinyl has evolved, resulting in more realistic soft vinyl kits. We hope you enjoy comparing them with the comic versions and seeing the changes in Kaiyodo soft vinyl figures.\u003cbr\u003eNANKOKU FACTORY soft vinyl garage kits are soft vinyl garage kits made and produced at Kaiyodo Space Factory Nankoku in Nankoku City, Kochi Prefecture. From Kaiyodo's classic works to the latest releases, a wide variety of all-Japan-made figures are produced every day.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e■ Specifications\u003cbr\u003eMansufacturer：KAIYODO\u003cbr\u003eItem No：SKC1018\u003cbr\u003eAges：15 years or older\u003cbr\u003eSize：21cm tall\u003cbr\u003eCopyright：ⒸHEADGEAR\u003cbr\u003eMaterial：PVC\u003cbr\u003eScale：1\/35\u003cbr\u003eJAN：4571587310678\u003cbr\u003e\u003cbr\u003e■ Notes\u003cbr\u003e●This product has sharp edges in order to realistically reproduce the characters. Please handle with care to avoid the risk of unexpected accidents. ●Contains small parts. Please take care to prevent children from accidentally swallowing them.\u003cbr\u003e*Images are for illustrative purposes only. Actual product may differ.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"kaiyodo","offers":[{"title":"Default Title","offer_id":46407847674014,"sku":"4571587310678","price":8690.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4571587310678.jpg?v=1768573504"},{"product_id":"4545784013229","title":"PLAMAX MF-67 minimum factory Griffon \u0026 Chimaera: Labor Color Ver. (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n A new era of robot model kits to enjoy with ultimate sculpting. Assemble dynamic Labors! \u003cbr\u003eThe minimum factory's mechanical models, which offer the comfort of posing unique to fixed models and palm-sized vignettes, now feature \"Mobile Police Patlabor\"! \"Griffon\" and \"Chimera\" have been made into new-style plastic models that allow you to fully enjoy the fun of model kits just by assembling them, with a three-dimensional and well-defined sculpt despite having a small number of parts. The two Labors are made of plastic colors that are inspired by each machine, and the finished product is also great to display as a small statue. Of course, the material is the same plastic as regular plastic models, so the \"fun of painting,\" such as color separation and weathering effects, is also expanded. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Max Factory\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Size: Overall height: approx. 70mm\u003cbr\u003e\r\n Product Specifications: Assembly plastic model\u003cbr\u003e\r\n Related Companies: Manufacturer: Max Factory\u003cbr\u003e Distributor: Good Smile Company\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Release Date: 2023\/03\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4545784013229\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n The photos shown may differ slightly from the actual product.","brand":"maxfactory","offers":[{"title":"Default Title","offer_id":46408016953502,"sku":"4545784013229","price":4180.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4545784013229.jpg?v=1768577534"},{"product_id":"4545784013236","title":"PLAMAX MF-68 minimum factory Griffon \u0026 Chimaera: Effect Color Ver. (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n A new era of robot plastic models to enjoy with ultimate sculpting. Display the Labors in dramatic colors! \u003cbr\u003eThe minimum factory's mechanical models, which offer the comfort of posing unique to fixed models and palm-sized vignettes, now feature \"Mobile Police Patlabor\"! \"Griffon\" and \"Chimera\" have been made into new-style plastic models with a small number of parts but with a three-dimensional feel and sharp details, allowing you to fully enjoy the fun of plastic models just by assembling them. The two Labors are made of parts in vivid plastic colors that evoke their respective effects and impressive scenes, and the finished product is also great to display as small statues. Of course, the material is the same plastic as regular plastic models, so the \"fun of painting,\" such as color separation and weathering effects, is also expanded. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Max Factory\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Size: Overall height: approx. 70mm\u003cbr\u003e\r\n Product Specifications: Assembly plastic model\u003cbr\u003e\r\n Related Companies: Manufacturer: Max Factory\u003cbr\u003e Distributor: Good Smile Company\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Release Date: 2023\/03\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4545784013236\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n The photos shown may differ slightly from the actual product.","brand":"maxfactory","offers":[{"title":"Default Title","offer_id":46408018231454,"sku":"4545784013236","price":4180.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4545784013236.jpg?v=1768577547"},{"product_id":"4571587310753","title":"1\/35 AV-98 Ingram Unit 1 Soft Vinyl Kit Reprint","description":"\u003cp\u003e■ Description\u003cbr\u003eMobile Police Patlabor was serialized in Shonen Sunday and made into an OVA (Original Video Animation). Following the series' success, the design gradually changed, and the soft vinyl figure's details and pose have evolved accordingly. This is not just a new pose; it's an upgraded version of the work.\u003c\/p\u003e\n\u003cp\u003eThis soft vinyl figure was created and produced by Kaiyodo Space Factory Nankoku in Nankoku City, Kochi Prefecture. NANKOKU FACTORY produces a wide variety of figures, each one individually crafted in Japan.\u003c\/p\u003e\n\u003cp\u003e●The figure has some sharp edges in order to realistically recreate the real creatures.\u003cbr\u003e●Please avoid rough handling, such as dropping, hitting, or swinging.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e■ Specifications\u003cbr\u003eMansufacturer：KAIYODO\u003cbr\u003eItem No：SKFC1042\u003cbr\u003eSeries：Mobile Police Patlabor\u003cbr\u003eSpecifications：Unpainted soft vinyl assembly kit\u003cbr\u003eSize：About 20cm tall\u003cbr\u003eWeight：148g\u003cbr\u003eMaterial：PVC, Resin (baton, antenna), Decal\u003cbr\u003eNumber of parts：Twenty pieces.\u003cbr\u003eRelease Date： January 2023\u003cbr\u003eCopyright：ⒸHEADGEAR\u003cbr\u003eScale：1\/35\u003cbr\u003eJAN：4571587310753\u003cbr\u003e\u003cbr\u003e■ Notes\u003cbr\u003e*The image is for illustrative purposes only and may differ from the actual product.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"kaiyodo","offers":[{"title":"Default Title","offer_id":46408170766494,"sku":"4571587310753","price":8690.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4571587310753.webp?v=1768893578"},{"product_id":"4545784013250","title":"PLAMAX MF-71 minimum factory Ingram \u0026 Crab-Man High Leg: Labor Color Ver. (Patlabor)","description":"■Product Description\u003cbr\u003e\r\n A new era of robot model kits to enjoy with ultimate sculpting. Bring the scene of a Labor battle to your tabletop! \u003cbr\u003eAs a new addition to minimum factory's mecha model series, which offers the pleasure of posing with fixed models and palm-sized vignettes, we have the \"AV-98 Ingram\" and the \"Clubman Highleg,\" which is being made into a model kit for the first time, from the \"Mobile Police Patlabor\" series! The two Labors are made of plastic parts in colors that reflect the image of each machine, and the three-dimensional and well-defined sculpting makes them a new kind of plastic model that allows you to fully enjoy the fun of model kits just by assembling them. Of course, the material is the same as regular plastic models, so the \"fun of painting,\" such as color separation and weathering effects, is also expanded. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Max Factory\u003cbr\u003e\r\n Release Date: May 2023\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Size: Overall height: approx. 70mm\u003cbr\u003e\r\n Sculptor: Ingram: Matsumi Numamoto \/ Clubman High Leg: Sedo \u0026 Hinato Sagara (Max Factory)\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4545784013250\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n The photos shown may differ slightly from the actual product.","brand":"maxfactory","offers":[{"title":"Default Title","offer_id":46408197046430,"sku":"4545784013250","price":4180.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4545784013250.jpg?v=1768583318"},{"product_id":"4545784013267","title":"PLAMAX MF-72 minimum factory Ingram \u0026 Crab-Man High Leg: Effect Color Ver. (Patlabor)","description":"■Product Description\u003cbr\u003e\r\n A new era of robot plastic models to enjoy with ultimate sculpting. Decorate your home with diorama-colored Labors! \u003cbr\u003eAs a new addition to minimum factory's mecha models, which offer the comfort of posing unique to fixed models and palm-sized vignettes, we have the \"AV-98 Ingram\" and the \"Clubman Highleg,\" which is being made into a plastic model for the first time, from the \"Mobile Police Patlabor\" series! The two Labors are made of refreshing plastic color parts that evoke their respective impressive scenes, and with their three-dimensional and well-defined sculpting, they are a new kind of plastic model that allows you to fully enjoy the fun of plastic models just by assembling them. Of course, the material is the same as regular plastic models, so the \"fun of painting,\" such as color separation and weathering effects, is also expanded. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Max Factory\u003cbr\u003e\r\n Release Date: May 2023\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Size: Overall height: approx. 70mm\u003cbr\u003e\r\n Sculptor: Ingram: Numamoto Matsumi \/ Clubman High Leg: Sedo \u0026 Sagara Hinato (Max Factory)\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4545784013267\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n The photos shown may differ slightly from the actual product.","brand":"maxfactory","offers":[{"title":"Default Title","offer_id":46408197505182,"sku":"4545784013267","price":4180.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4545784013267.jpg?v=1768583331"},{"product_id":"4537807190338","title":"1\/35 ARTPLA Sculpture Works Ingram Reactive Armor Unit 1","description":"■Product Description\u003cbr\u003e\r\n Ingram Unit 1 equipped with reactive armor appears in ARTPLA in a large 1\/35 scale! \u003cbr\u003eA sculpted work that incorporates the design by Yutaka Izubuchi in high resolution has been made into a plastic model kit! \u003cbr\u003eFrom Mobile Police Patlabor 2 the Movie, Ingram Unit 1 equipped with reactive armor joins the ARTPLA lineup! \u003cbr\u003eThis is a fixed-pose plastic model kit that pursues the most powerful and beautiful posing and proportions of Ingram, designed by illustrator Yutaka Izubuchi. \u003cbr\u003eThere are many highlights, such as the organic shape of the reactive armor parts that convey even the texture, and the head and neck area composed of flowing surfaces. \u003cbr\u003eAlthough the shape of the surface of the parts is delicate, it can be assembled sturdily with thick molding. \u003cbr\u003eThe molded color is pearl gray which beautifully shows the unevenness of the sculpting. \u003cbr\u003eUnits 2 and 3 are also under production! Please create a scene where all three units are lined up. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Kaiyodo\u003cbr\u003e\r\n Item No: AP027\u003cbr\u003e\r\n Series: Mobile Police Patlabor 2 the Movie\u003cbr\u003e\r\n Character Name: Ingram Unit 1\u003cbr\u003e\r\n Size: 230mm (total height)\u003cbr\u003e\r\n Material: HIPS\u003cbr\u003e\r\n Product Specifications: ARTPLA\u003cbr\u003e・Plastic model kit\u003cbr\u003e・Fixed pose model\u003cbr\u003e・Adhesive required\u003cbr\u003e\r\n Sculptor: Kazuya Kira\u003cbr\u003e\r\n Copyright: ?HEADGEAR\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4537807190338\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n *This product is a plastic model kit that requires assembly. \u003cbr\u003e*Plastic model adhesive is required for assembly. \u003cbr\u003e*The images shown are of a development sample and may differ slightly from the actual product. Please understand in advance. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"kaiyodo","offers":[{"title":"Default Title","offer_id":46409194406046,"sku":"4537807190338","price":8800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4537807190338.jpg?v=1768617283"},{"product_id":"4545784013656","title":"1\/48 PLAMAX NEO 3D SHOW Type Zero VS Boxer (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n The \"Zero-Type vs. Boxer Showdown Scene\" by Hitoshi Hayami is brought back to life with digital technology! \u003cbr\u003eFrom the hugely popular \"Patlabor 3D SHOW\" series in Monthly Hobby Japan magazine, which featured stylish and cool poses of various Labors, this masterpiece has been enhanced with the latest technology. The powerful scene of the boxer being defeated by Zero-Type's piercing hand has been recreated by 3D scanning the original published work and digitally refining the edges and dividing the parts with painting in mind. At the original 1\/48 scale, anyone can now enjoy the beauty of Hayami's sculpting. \u003cbr\u003e*Please prepare plastic model tools and adhesive separately for assembly. \u003cbr\u003e*If painting, please use paint for plastic models. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Max Factory\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: Zero-Type Boxer\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Release Date: October 2024 → Postponed to January 2025\u003cbr\u003e\r\n Contents\/Accessories: Marking decals included\u003cbr\u003e\r\n Product Specifications: Assembly plastic model\u003cbr\u003e\r\n Size: Overall height: Zero-Type: Approx. 145mm Boxer: Approx. 170mm\u003cbr\u003e\r\n Sculptor: Hitoshi Hayami\u003cbr\u003e\r\n Scale: 1\/48\u003cbr\u003e\r\n JAN: 4545784013656\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n * The photos shown may differ slightly from the actual product. \u003cbr\u003e * Because the painting process is done by hand, there may be slight differences between individual products. Please understand in advance. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"maxfactory","offers":[{"title":"Default Title","offer_id":46409254338718,"sku":"4545784013656","price":8800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4545784013656.jpg?v=1768622389"},{"product_id":"4595055216101","title":"1\/35 Robodo Ingram Unit 2 Reactive Armor Equipment (Patlabor 2 the Movie)","description":"■Product Description\u003cbr\u003e\r\n As a new Robo-Do figure from threezero based on \"Mobile Police Patlabor,\" the Ingram Reactive Armor equipped version from the theatrical anime \"Mobile Police Patlabor 2 the Movie\" is now available! Units 1, 2, and 3 equipped with Reactive Armor will be released simultaneously. \u003cbr\u003e\u003cbr\u003eThe \"Robo-Do Ingram Unit 2 Reactive Armor\" is a 1\/35 scale (approximately 23cm tall) articulated figure made of ABS, PVC, POM, zinc alloy die-cast, and fabric. Zinc alloy die-cast is used for the articulation frame, resulting in a total of approximately 50 points of articulation throughout the body. Fabric is used for the joint covers of the arms and thighs to achieve both the reproduction of the Ingram's silhouette and articulation. The distinctive reactive armor jacket is made of soft PVC, with the details precisely reproduced. Furthermore, threezero's signature weathering paintwork is subtly applied to the fabric and reactive armor jacket to pursue even greater realism. \u003cbr\u003e\u003cbr\u003eThe \"Robo-Do Ingram Unit 2 Reactive Armor Equipped\" also features various gimmicks to improve playability. The side cover on the right calf can be opened and closed, and the hand revolver cannon can be stored inside. In addition, the extendable gimmick of the right wrist allows for the gimmick of reaching for the stored hand revolver cannon. The front of the reactive armor jacket is detachable, and the cockpit hatch underneath can be opened and closed. A pilot figure (non-articulated) of Isao Ota, designed in the style of \"Mobile Police Patlabor 2 the Movie,\" can be placed in the cockpit seat. The cockpit seat can be raised and lowered, and the bulletproof windshield can be deployed when the pilot's head is visible from the neck of the Ingram. The included equipment is a hand revolver cannon, stun sticks (extended and retracted), a riot gun, and a shield for the left forearm (which can store the retracted stun stick inside). In addition, interchangeable parts include various wrist parts for different poses and a standard Robo-Do action stand. \u003cbr\u003e\u003cbr\u003eAccessories: Hand revolver cannon, stun stick (extended), stun stick (retracted), riot gun, left forearm shield (can store the retracted stun stick inside), various interchangeable wrist parts (1 pair of relaxed hands, 1 pair of wide-open hands, 1 pair of fists, right hand for holding the hand revolver cannon, 1 pair of hands for holding the stun stick, right hand for holding the riot gun), pilot figure (Isao Ota), Robo-do action stand\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: three zero\u003cbr\u003e\r\n Series: Mobile Police Patlabor 2 the Movie\u003cbr\u003e\r\n Character Name: Ingram Unit 2\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Product Specifications: Made of ABS, PVC, POM, and zinc alloy (joint covers are made of cloth, reactive armor jacket is made of soft PVC) Painted movable figure, 1\/35 scale, overall height: approx. 230mm\u003cbr\u003e\r\n Sculptor: threezero\u003cbr\u003e\r\n Related Companies: Manufacturer: threezero\u003cbr\u003e Distributor: Good Smile Company Manufacturer:\u003cbr\u003e Distributor: Good Smile Company\u003cbr\u003e\r\n Scale: 1\/35\u003cbr\u003e\r\n JAN: 4595055216101\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n The photos shown are of a sample product. Some specifications may differ from the actual product.\u003cbr\u003eBecause the painting process is done by hand, there may be slight differences between individual products. Please understand in advance. Due to the nature of the paint, it may not be completely dry upon opening. If it is not dry, leave it in a well-ventilated, shaded room for 2-3 days and wait until the painted surface is dry before touching it. Please note that using it while it is still wet may cause color transfer or fingerprints.","brand":"threezero","offers":[{"title":"Default Title","offer_id":46409901146270,"sku":"4595055216101","price":28800.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4595055216101.jpg?v=1768638568"},{"product_id":"4545784014356","title":"1\/20 PLAMAX MF-75: minimum factory Machine Bust Collection Noa Izumi with Alphonse (Mobile Police Patlabor) (Rerelease)","description":"■Product Description\u003cbr\u003e\r\n From the anime \"Mobile Police Patlabor,\" the bust of the protagonist \"Izumi Noa\" and the AV-98 Ingram Unit 1 \"Alphonse\" standing in the hangar has been made into a 1\/20 scale diorama plastic model. The surface details, police lights, and camera interiors are finely sculpted to take advantage of the large scale, and when combined with various clear parts, it has a realistic finish that is unique to Labors. You can enjoy applying the included decals or painting it, and enjoy the scene that can be seen in the Special Vehicles Division 2 hangar. \u003cbr\u003e\u003cbr\u003e・Molded from 6 colors of plastic, it will be finished in the image colors of \"AV-98 Ingram\" just by assembling it. \u003cbr\u003e・The police emblem is gold plated. \u003cbr\u003e・Various markings for \"Alphonse\" use water transfer decals. \u003cbr\u003e・\"Izumi Noa\" is a white model, and a special decal is included to reproduce the eyes. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Max Factory\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Names: Izumi Noa, Alphonse\u003cbr\u003e\r\n Product Specifications: Assembled plastic model kit, 1\/20 scale, overall height: Izumi Noa: approx. 80mm \/ Alphonse: approx. 210mm\u003cbr\u003e\r\n Sculptor: Shining Wizard @ Sawachika (Max Factory)\u003cbr\u003e\r\n Coloring: CG Coloring: POLY-TOYS\u003cbr\u003e\r\n Related Companies: Manufacturer: Max Factory\u003cbr\u003e Distributor: Good Smile Company\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/20\u003cbr\u003e\r\n JAN: 4545784014356\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n The photos shown are of a sample product. The actual product may differ in some specifications. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"maxfactory","offers":[{"title":"Default Title","offer_id":46419413172382,"sku":"4545784014356","price":13200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4545784014356.jpg?v=1768797128"},{"product_id":"4934054065134","title":"1\/72 Hannibal PKO Ver. (The Mobile Police Patlabor) (Reissue)","description":"■Product Description\u003cbr\u003e\r\n Hannibal, who appeared from the opening of the movie in \"Patlabor 2 The Movie\" and made a significant contribution to the introduction of the story, is now available. \u003cbr\u003eIt will be commercialized as an easy-to-assemble and easy-to-process plastic kit. \u003cbr\u003eThe distinctive joint covers on each part are made of easy-to-process plastic, and the range of motion has been further pursued. \u003cbr\u003eIn addition, joint parts for posing are included so that you can make cooler poses. \u003cbr\u003eThe cockpit interior inherits the technology cultivated with Hellhound and reproduces the sculpting that skillfully elevates the finer details of the setting. \u003cbr\u003eThe searchlight cover part comes with a transparent molded part, and each finger of the wrist is articulated, making it a product that, despite being a character model, has the level of detail and freedom of a scale model. \u003cbr\u003e\u003cbr\u003e【This product is a re-release】\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Kotobukiya\u003cbr\u003e\r\n Item No: KP51X\u003cbr\u003e\r\n Series： Mobile Police Patlabor 2 the Movie\u003cbr\u003e\r\n Character Name: Hannibal\u003cbr\u003e\r\n Release Date: March 2024\u003cbr\u003e\r\n Copyright Notice: (C) 1993 HEADGEAR \/ BANDAI VISUAL \/ TOHOKUSHINSHA \/ Production IG\u003cbr\u003e\r\n Size: Approximately 140mm in height\u003cbr\u003e\r\n Scale: 1\/72\u003cbr\u003e\r\n JAN：4934054065134\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"kotobukiya","offers":[{"title":"Default Title","offer_id":46419923140766,"sku":"4934054065134","price":5720.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4934054065134.jpg?v=1768803209"},{"product_id":"4934054065097","title":"1\/72 HANNIBAL JGSDF Ver. (The Mobile Police Patlabor) (Reissue)","description":"■Product Description\u003cbr\u003eFrom Mobile Police Patlabor THE MOVIE 2 comes \"Hannibal JGSDF Specification\".\u003cbr\u003eThe armament has been changed from the \"PKO Specification\" and a gatling gun has been newly added.The rubber parts of the movable parts are made of plastic parts as with regular robot kits, taking into consideration ease of assembly and painting.A fixed version without gaps is also included to take into consideration the clearance (gaps) of the movable parts.The main body is molded in the standard dark green of the Japan Ground Self-Defense Force, and the \"Japan Ground Self-Defense Force\" logo and aircraft number are included as water transfer decals. \u003cbr\u003e\u003cbr\u003e【This product is a re-release】\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Kotobukiya\u003cbr\u003e\r\n Item No: KP102X\u003cbr\u003e\r\n Series： Mobile Police Patlabor 2 the Movie\u003cbr\u003e\r\n Character Name: Hannibal\u003cbr\u003e\r\n Release Date: April 2024\u003cbr\u003e\r\n Size: Approximately 140mm in height\u003cbr\u003e\r\n Scale: 1\/72\u003cbr\u003e\r\n JAN: 4934054065097\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"kotobukiya","offers":[{"title":"Default Title","offer_id":46419923173534,"sku":"4934054065097","price":5940.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4934054065097.jpg?v=1768803225"},{"product_id":"4537807190345","title":"1\/35 ARTPLA SCULPTURE WORKS AV-98 Ingram Reactive Armor Unit 2 (Patlabor 2: The Movie)","description":"■Product Description\u003cbr\u003e\r\n The Ingram Unit 2 equipped with reactive armor, with various textures expressed in plastic kit form, joins the ARTPLA lineup! \u003cbr\u003e\u003cbr\u003eFrom Mobile Police Patlabor 2 the Movie, the Ingram Unit 2 equipped with reactive armor joins the ARTPLA lineup. \u003cbr\u003eEquipped with the Riot Gun, the iconic weapon of Unit 2. \u003cbr\u003eThe pose adopts the low-ready position with the muzzle lowered, just before entering the underwater tunnel. \u003cbr\u003eThis brings out a different charm from the trigger-happy impression of Unit 2 that fires its weapon in rapid succession, and is finished as a sculpt that creates a sense of tension. \u003cbr\u003eThe difference in material texture between the exterior parts and the reactive armor parts is expressed in the plastic kit. The additional armor repurposed from the Helldiver is also reproduced with deep molding that gives it a strong presence. \u003cbr\u003eThe molded color is pearl gray, which beautifully highlights the unevenness of the sculpt. \u003cbr\u003eEnjoy this pose-fixed plastic model kit that can be assembled firmly with thick molding. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Kaiyodo\u003cbr\u003e\r\n Item No: AP028\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: Ingram Reactive Armor Unit 2\u003cbr\u003e\r\n Sculptor: Kazuya Kira\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Release Date: Scheduled for November 2024 → Postponed to December 2024\u003cbr\u003e\r\n Size: Overall height: Approx. 223mm\u003cbr\u003e\r\n Material: HIPS\u003cbr\u003e\r\n Scale: 1\/35\u003cbr\u003e\r\n JAN：4537807190345\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"kaiyodo","offers":[{"title":"Default Title","offer_id":46419929071774,"sku":"4537807190345","price":8800.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4537807190345.jpg?v=1768803658"},{"product_id":"4537807190352","title":"1\/35 ARTPLA SCULPTURE WORKS AV-98 Ingram Reactive Armor Unit 3 (Patlabor 2: The Movie)","description":"■Product Description\u003cbr\u003e\r\n Under the supervision of mecha designer Yutaka Izubuchi, the complex shape of the Medusa head has been reproduced. Ingram Unit 3 equipped with reactive armor joins the ARTPLA lineup! \u003cbr\u003e\u003cbr\u003eFrom Mobile Police Patlabor 2 the Movie, Ingram Unit 3 equipped with reactive armor joins the ARTPLA lineup. \u003cbr\u003eUnder the supervision of Yutaka Izubuchi, the head of Unit 3, commonly known as the Medusa head, which is composed of complex surfaces has been reproduced. \u003cbr\u003eThere are many highlights, such as the organic shape of the reactive armor parts that conveys even the texture, and the sealing around the neck. \u003cbr\u003eIn addition to the revolver cannon as seen in the movie, it is also possible to change to the deployed stun stick. \u003cbr\u003eThe molded color is pearl gray, which beautifully highlights the unevenness of the sculpting. \u003cbr\u003eEnjoy this pose-fixed plastic model kit that can be assembled firmly with thick molding. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Kaiyodo\u003cbr\u003e\r\n Item No: AP029\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: Ingram Reactive Armor Unit 3\u003cbr\u003e\r\n Sculptor: Kazuya Kira\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Release Date: Scheduled for November 2024 → Postponed to December 2024\u003cbr\u003e\r\n Size: Overall height: Approx. 225mm\u003cbr\u003e\r\n Material: HIPS\u003cbr\u003e\r\n Scale: 1\/35\u003cbr\u003e\r\n JAN：4537807190352\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"kaiyodo","offers":[{"title":"Default Title","offer_id":46419929235614,"sku":"4537807190352","price":8800.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4537807190352.jpg?v=1768803674"},{"product_id":"4905083201718","title":"1\/43 Mobile Police Patlabor AV-98 Ingram Reactive Armor (Reissue)","description":"■Product Description\u003cbr\u003e\r\n This is the final sortie of the Special Vehicles Division 2nd Platoon. Do your best!! \u003cbr\u003e\u003cbr\u003eUnder the supervision of mecha designer Yutaka Izubuchi, the Ingram Reactive Armor equipped model that appeared in \"Mobile Police Patlabor 2 the Movie\" is being re-released! The reactive armor and sealing covers on various parts of the machine are reproduced in plastic material, pursuing a realistic design. Combined with the built-in joints in various places, you can enjoy recreating various scenes from the movie. This kit is a convertible kit in which you can choose and assemble the head parts of Unit 1, Unit 2, and Unit 3. The leg hatches can be opened, and the cockpit seat can be raised and lowered. It comes with pilot figures of \"Izumi Noa\", \"Ota Isao\", and \"Nagumo Shinobu\". It also comes equipped with a revolver cannon, stun stick, and riot gun. Please enjoy Aoshima's Patlabor series. \u003cbr\u003e\u003cbr\u003e【PR Points】\u003cbr\u003e・Color-coded molding, snap kit that requires no glue\u003cbr\u003e・Markings on various parts of the aircraft are reproduced with water-slide decals\u003cbr\u003e・Convertible kit that allows you to choose and assemble the heads of Unit 1, Unit 2, and Unit 3\u003cbr\u003e・Includes stun stick, revolver cannon, and riot gun\u003cbr\u003e・The sealing parts of the joints are made of plastic, allowing for highly flexible posing\u003cbr\u003e・The cockpit can be raised and lowered. Includes same-scale figures of Izumi Noa, Ota Isao, and Nagumo Shinobu in their piloting poses.\u003cbr\u003eThe storage hatches on the calves are openable and closable, and the revolver cannon can be stored inside.\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Aoshima Bunka Kyozai Co., Ltd.\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Product Specifications: ・Snap-fit model that requires no glue\u003cbr\u003e・Color-coded molding\u003cbr\u003e・Water-slide decals for marking reproduction included\u003cbr\u003e\r\n Size: Overall height of the unit approx. 190mm\u003cbr\u003e\r\n Material: PS\/ABS\/PE\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/43\u003cbr\u003e\r\n JAN: 4905083201718\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n *The image is of a prototype. The actual product may differ. \u003cbr\u003e*This product is a plastic model kit. Tools and other items are required for assembly. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"aoshima","offers":[{"title":"Default Title","offer_id":46420872528030,"sku":"4905083201718","price":10780.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4905083201718.jpg?v=1768825288"},{"product_id":"4580799830966","title":"1\/144 Patlabor2 the Movie F-16J Plastic Model Kit","description":"■Product Description\u003cbr\u003eThe phantom F-16J aircraft, which only appeared by name in Mobile Police Patlabor 2 the Movie, has been miraculously made into a 1\/144 scale plastic model kit.\u003cbr\u003eSingle-seat and two-seat versions are selectable.\u003cbr\u003eThe assembly instructions include the aircraft's color scheme, which is assumed to be based on the F-2.\u003cbr\u003eIn addition to the decals for the F-2, decals for the F-16J, such as the Wyvern, are included.\u003cbr\u003eThe total length when assembled is approximately 110mm. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: HMA (HMA)\u003cbr\u003e\r\n Series： Mobile Police Patlabor 2 the Movie\u003cbr\u003e\r\n Copyright: © HEADGEAR\u003cbr\u003e\r\n Scale: 1\/144\u003cbr\u003e\r\n JAN: 4580799830966\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"hma","offers":[{"title":"Default Title","offer_id":46421053571230,"sku":"4580799830966","price":3520.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580799830966.jpg?v=1768829648"},{"product_id":"4580590208940","title":"1\/60 MODEROID TYPE-7 Brocken: OVA Color Ver. (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n From the anime \"Mobile Police Patlabor,\" the military labor \"TYPE-7 Brocken\" manufactured by Shaft Enterprises joins the MODEROID series in the red demo color that appeared in the OVA! \u003cbr\u003e\u003cbr\u003e・Approximately 130mm tall, with movable joints. \u003cbr\u003e・Reproduces the distinctive camera unit shape inside the head armor parts. \u003cbr\u003e・Includes interchangeable wrists and a 105mm cannon. \u003cbr\u003e・The 105mm cannon can be connected to the main body with the included lead wire and joint parts. \u003cbr\u003eIn addition, both stored and deployed bipods are included and can be attached by choice. \u003cbr\u003e・The various molded colors and decals allow you to reproduce a color scheme close to the image just by assembling it. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: TYPE-7 Brocken\u003cbr\u003e\r\n Product Specifications: Assembly plastic model, 1\/60 scale\u003cbr\u003e\r\n Size: Overall height: approx. 130mm\u003cbr\u003e\r\n Sculptor: Arm-Q\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/60\u003cbr\u003e\r\n JAN: 4580590208940\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *The image is a CG rendering of a painted model. The actual product may differ from the image shown.","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46421056848030,"sku":"4580590208940","price":4800.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580590208940.jpg?v=1768829794"},{"product_id":"4905083201725","title":"1\/43 Mobile Police Patlabor AV-98 Ingram 1st + Special Command Vehicle Type 98","description":"■Product Description\u003cbr\u003eForward and Backup are One\u003cbr\u003eUnder the supervision of Yutaka Izubuchi, the AV-98 Ingram Unit 1, the latest version of the Ingram, has been renewed as a set product with the Type 98 Special Command Vehicle.\u003cbr\u003eThe sealing covers on various parts of the machine that characterize the Labor are made of plastic parts with a realistic design, and together with the built-in joints in various places, you can enjoy recreating various scenes from the series.\u003cbr\u003eThe Ingram's leg hatches and cockpit hatch can be opened without swapping parts, and the cockpit also reproduces the raising and lowering of the seat, and you can place a figure of Izumi Noa, the pilot, in a seated position.\u003cbr\u003eAccessories include a revolver cannon and stun stick, as well as 5 types of wrist parts for both the left and right hands.\u003cbr\u003eIn addition, the Type 98 Special Command Vehicle is a very compact vehicle that boasts high mobility, and its distinctive body has been realistically reproduced in 3D, and you can place a figure of Shinohara Yuma inside. \u003cbr\u003eIn addition, one Guard Robot of the same scale is included, allowing you to enjoy displaying it in combination with the Ingram and command vehicle. \u003cbr\u003e\u003cbr\u003e[PR Points]\u003cbr\u003e・Includes one Ingram Unit 1 and one Type 98 Special Command Vehicle\u003cbr\u003e・Color-coded molding, snap kit that requires no glue\u003cbr\u003e・Markings on various parts of the aircraft\/vehicle are reproduced with water-slide decals\u003cbr\u003e・Includes a Guard Robot of the same scale [BEL-1999 [Cardia] 1 figure included\u003cbr\u003e\u003cbr\u003eIngram Unit 1\u003cbr\u003e・Stun sticks are included in both retractable and extendable states\u003cbr\u003e・One revolver cannon, the Ingram's signature weapon, is included\u003cbr\u003e・The joint sealing parts are made of plastic, allowing for highly flexible posing\u003cbr\u003e・The cockpit can be opened and closed, and a figure of Izumi Noa in the same scale in a seated position is included\u003cbr\u003e・The storage hatch on the calf can be opened and closed, and the revolver cannon can be stored inside\u003cbr\u003e・The head shutter and retractable police light can be opened and closed by swapping parts\u003cbr\u003e\u003cbr\u003eType 98 Special Command Vehicle\u003cbr\u003e・The front hatch and side doors can each be displayed in an open state\u003cbr\u003e・A figure of Shinohara Yuma who can sit in the command vehicle is included\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Aoshima Bunka Kyozai Co., Ltd.\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: Ingram Unit 1\u003cbr\u003e\r\n Size: Ingram Unit 1 Total Height Approx. 190mm\u003cbr\u003eType 98 Special Command Vehicle Total Height Approx. 40mm\u003cbr\u003e\r\n Material: PS\/ABS\/PVC\u003cbr\u003e\r\n Product Specifications: Snap-fit kit model requiring no glue, color-coded molding, includes water-slide decals for marking reproduction, Labor development and design: TEAM NAVEL (UNITEC)\u003cbr\u003e\r\n Scale: 1\/43\u003cbr\u003e\r\n JAN: 4905083201725\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n *The image is of a prototype. The actual product may differ. \u003cbr\u003e*This product is a plastic model kit. Assembly requires additional tools, etc.","brand":"aoshima","offers":[{"title":"Default Title","offer_id":46421137883294,"sku":"4905083201725","price":10780.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4905083201725.jpg?v=1768834170"},{"product_id":"4580799833882","title":"1\/144 Patlabor 2: The Movie: Hellhound Plastic Model Kit","description":"■Product Description\u003cbr\u003e\r\n ■The \"Hellhound,\" the main mecha from the story in Mobile Police Patlabor 2 the Movie, has been made into a 1\/144 scale plastic model kit. \u003cbr\u003e■It has been thoroughly supervised by \"Shoji Kawamori,\" who designed the \"Hellhound.\" \u003cbr\u003e■With selectable parts for the setting and parts for the image in the movie, you can create your ideal \"Hellhound.\" \u003cbr\u003e■The package art by \"Zephyr\" is overwhelmingly impactful! \u003cbr\u003e■Decals are included to recreate both the first and second movies. \u003cbr\u003e■Enjoy the \"Hellhound,\" the main mecha of a fictional war to the fullest. \u003cbr\u003e■\"I might have wanted to watch it a little longer. The future of this city...\"\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: HMA (HMA)\u003cbr\u003e\r\n Series： Mobile Police Patlabor 2 the Movie\u003cbr\u003e\r\n Character Name: Hellhound\u003cbr\u003e\r\n Size: Assembled size approx. 12cm x 9cm x 3cm\u003cbr\u003eBox size approx. 29.5cm x 16cm x 4.5cm\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Release Date: Scheduled for 2025\/6\/27\u003cbr\u003e\r\n Scale: 1\/144\u003cbr\u003e\r\n JAN: 4580799833882\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n *The image is of a product under development and may differ from the final product. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"hma","offers":[{"title":"Default Title","offer_id":46421218689182,"sku":"4580799833882","price":4180.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580799833882.jpg?v=1768836152"},{"product_id":"4905083201732","title":"1\/43 Mobile Police Patlabor AV-98 Ingram 2nd + Special Command Vehicle Type 98","description":"■Product Description\u003cbr\u003e\r\n Go to hell!!\u003cbr\u003e\u003cbr\u003eThe AV-98 Ingram Unit 2, released as the latest version of the Ingram under the supervision of Yutaka Izubuchi, will be renewed as a set product with the Type 98 Special Command Vehicle.\u003cbr\u003eThe sealing covers on various parts of the machine that characterize the Labor are made of plastic parts with a realistic design, and together with the built-in joints in various places you can enjoy recreating various scenes from the series.\u003cbr\u003eThe Ingram's leg hatches and cockpit hatch can be opened without swapping parts, and the cockpit also reproduces the raising and lowering of the seat, and you can place a figure of the pilot, Isao Ota, in a seated position.\u003cbr\u003eAccessories include a revolver cannon and stun stick, as well as a riot gun with a deployable stock.\u003cbr\u003eThe Type 98 Special Command Vehicle is a very compact vehicle that boasts high mobility, and its distinctive body has been realistically reproduced in three dimensions, and you can place Kanuka Clancy and Kumagami Takeo figures inside. \u003cbr\u003eIn addition, one Guard Robot of the same scale is included, allowing you to enjoy displaying it in combination with the Ingram and command vehicle. \u003cbr\u003e\u003cbr\u003e[PR Points]\u003cbr\u003e・Includes one Ingram Unit 2 and one Type 98 Special Command Vehicle\u003cbr\u003e・Color-coded molding, snap kit that requires no glue\u003cbr\u003e・Markings on various parts of the machine are reproduced with water-slide decals\u003cbr\u003e・Includes a Guard Robot of the same scale [BEL-1999 [Cardia] 1 figure included\u003cbr\u003e\u003cbr\u003eIngram Unit 2\u003cbr\u003e・Stun sticks are included in both retractable and extendable states\u003cbr\u003e・One revolver cannon, the Ingram's signature weapon, is included\u003cbr\u003e・A riot gun with a deployable stock is included\u003cbr\u003e・The joint sealing parts are made of plastic, allowing for highly flexible posing\u003cbr\u003e・The cockpit can be opened and closed, and a figure of Isao Ota in a seated position at the same scale is included\u003cbr\u003e・The storage hatch on the calf can be opened and closed, and the revolver cannon can be stored inside\u003cbr\u003e・The head shutter and retractable police light can be opened and closed by swapping parts\u003cbr\u003e\u003cbr\u003eType 98 Special Command Vehicle\u003cbr\u003e・The front hatch and side doors can each be displayed in an open state\u003cbr\u003e・Figures of Kanuka Clancy and Kumagami Takeo who can sit in the command vehicle are included\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Aoshima Bunka Kyozai Co., Ltd.\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: Ingram Unit 2, Type 98 Special Command Vehicle\u003cbr\u003e\r\n Product Specifications: Snap-fit model requiring no glue, pre-colored\u003cbr\u003e\r\n Size: Ingram Unit 2, total height approx. 190mm\u003cbr\u003e Type 98 Special Command Vehicle, total height approx. 40mm\u003cbr\u003e\r\n Material: PS\/ABS\/PVC\u003cbr\u003e\r\n Contents\/Accessories: Water-slide decals for marking reproduction included\u003cbr\u003e\r\n Prototype Production: Labor Development and Design: TEAM NAVEL (UNITEC)\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/43\u003cbr\u003e\r\n JAN: 4905083201732\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n *The image is of a prototype. The actual product may differ. \u003cbr\u003e*This product is a plastic model kit. Tools and other items are required for assembly. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"aoshima","offers":[{"title":"Default Title","offer_id":46421418147998,"sku":"4905083201732","price":10780.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4905083201732.jpg?v=1768841280"},{"product_id":"4545782123968","title":"1\/150 Mobile Police Patlabor N Gauge Shinohara Heavy Industries Container (20ft) Set of 2","description":"■ Description\u003cbr\u003e\nThis is the second installment of the Platz N-Gage Container, which takes us through the world of the popular series, the Mobile Police Patreon!\u003cbr\u003e\nThis time it's the main mecca.・Ingram's original specification, the company's logo with the \"SH\" design on the blue side of the container, and the finished product with high-precision inkjet printing.\u003cbr\u003e\nPlease note the letter \"Handling Attention in Precision Mechanical Transportation\", which is printed with an accuracy that can be clearly read on the N-gauge scale.\u003cbr\u003e\nThe entire container, which is about 40 mm long, shows the details of the sides, of course, and the levers on the sides of the door, as well as the details.\u003cbr\u003e\nIt's a two-piece set, and you can decorate it as a patreon item, and of course, you can put it in an N-Gage truck and enjoy it as a railway model item.\u003cbr\u003e\nI'd like you to add the [SCHAFT] specification (PTC150-2) to the collection.\u003cbr\u003e\n\u003cbr\u003e\n■ Specifications\u003cbr\u003e\nMaker：PLATZ\u003cbr\u003e\nItem No：PTC150-1\u003cbr\u003e\nTitle：He's a traffic police patrolman.\u003cbr\u003e\nCopyright：It's all right.\u003cbr\u003e\nProduct Specifications：High-precision printed finished.\u003cbr\u003e\nSize：One container is 40 x 16mm.\u003cbr\u003e\nScale：Other scales\u003cbr\u003e\nJAN：4545782123968\u003cbr\u003e\n\u003cbr\u003e\n","brand":"platz","offers":[{"title":"Default Title","offer_id":46455037067422,"sku":"4545782123968","price":2640.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4545782089806.webp?v=1769682148"},{"product_id":"4545782123975","title":"Mobile Police Patlabor N Gauge Shaft Enterprise Japan Container (20ft) Set of 2","description":"■ Description\u003cbr\u003e\n■Re-create a 20-foot container to the size of an N-gate.\u003cbr\u003e\n■It's a high-precision printed finished product.\u003cbr\u003e\n■Two sets.\u003cbr\u003e\n■The shaft.・It's an enterprise.・Japan, specifications.\u003cbr\u003e\n\u003cbr\u003e\nIt's the 35th anniversary of the OVA, and the hugely popular series, \"Moving Police Patrol\", is finally coming to life as a platinum-sized container!\u003cbr\u003e\nShaft is the developer of the \"black rebar\" glyphs featured in comic books and TV anime.・It's an enterprise.・What are you doing?\u003cbr\u003e\nIt's a complete reproduction of the company's distinctive trademark in high-precision inkjet printing.\u003cbr\u003e\nIt's hard to imagine what the contents of the container are like when you see the letters \"in precision mechanical transportation\" printed in an accurate N-gauge scale.\u003cbr\u003e\nThere's two sets of individual pieces, and of course, we're going to decorate them as a trailblazer item, and of course, we're going to decorate them as a gauge scale, and we're going to put them on a truck, and we're going to put them on a railroad model item, and of course, we're going to enjoy it.\u003cbr\u003e\nI'm looking forward to the Platz N-Gage Container series, which is a new entry into the world of Patreonware.\u003cbr\u003e\n\u003cbr\u003e\n■ Specifications\u003cbr\u003e\nMaker：PLATZ\u003cbr\u003e\nItem No：PTC150-2\u003cbr\u003e\nProduct Specifications：High-precision printed finished.\u003cbr\u003e\nSize：Package size: 117 x 60 x 20 mm\u003cbr\u003e\nCopyright：It's all right.\u003cbr\u003e\nTitle：He's a traffic police patrolman.\u003cbr\u003e\nScale：non scale\u003cbr\u003e\nJAN：4545782123975\u003cbr\u003e\n\u003cbr\u003e\n■ Notes\u003cbr\u003e\n・You can change the price, release date, etc. without notice.\u003cbr\u003e\n・Please see the product details, release dates, monthly guidelines, and our website.\u003cbr\u003e\n・It's only a limited quantity, so please forgive me if I run out of it.\u003cbr\u003e\n\u003cbr\u003e\n","brand":"platz","offers":[{"title":"Default Title","offer_id":46455037952158,"sku":"4545782123975","price":2640.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4545782089813.webp?v=1769682285"},{"product_id":"4571697183476","title":"1\/60 MODEROID MPL-97S Python (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n The main unit of the First Platoon, the second generation Patlabor, joins the MODEROID series! \u003cbr\u003eFrom the anime \"Mobile Police Patlabor\", the Manabe Heavy Industries-made Patrol Labor \"MPL-97S Python\" joins the MODEROID series! \u003cbr\u003e\u003cbr\u003e・Approximately 140mm tall, each joint is movable. \u003cbr\u003e・The head visor is movable without needing to be swapped. \u003cbr\u003e・Includes interchangeable wrists, anti-Labor stun sticks (long and short), and a large shield. \u003cbr\u003e・The large shield can be attached to the forearm, or held in the hand using the dedicated grip. \u003cbr\u003e・The head visor and red light come in painted and unpainted versions. \u003cbr\u003e・Two types of water-slide decals to reproduce the unit number are included, allowing you to choose between Unit 1 and Unit 2. \u003cbr\u003e・With each molded color, pre-painted parts, and water-slide decals, you can reproduce a color scheme close to the image just by assembling it. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: MPL-97S Python\u003cbr\u003e\r\n Size: Overall height: approx. 140mm\u003cbr\u003e\r\n Material: Assembly plastic model\u003cbr\u003e\r\n Sculptor: Arm-Q\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/60\u003cbr\u003e\r\n JAN: 4571697183476\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n ・Images are for illustrative purposes only. Actual product may differ. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46496810270878,"sku":"4571697183476","price":5900.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4571697183476.jpg?v=1770746000"},{"product_id":"4580828668126","title":"1\/60 MODEROID HL-98 Hercules 21 \u0026 ASV99 Boxer: Alternate Ver. \u0026 Cardia (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n A set of a work laborer and a security robot is now available! \u003cbr\u003eFrom the anime \"Mobile Police Patlabor\", the heavy-duty work laborer \"HL-98 Hercules 21\" manufactured by Hishii Industries and the guard robot \"Cardia\" that guards the Ark are now available as a set! \u003cbr\u003e\u003cbr\u003e・Hercules is approximately 130mm tall, and Cardia is approximately 15mm tall. Hercules' joints are movable. \u003cbr\u003e・Three Cardias are included. \u003cbr\u003e・Hercules is reproduced with some newly sculpted parts to match the version that appeared in the OVA and theatrical version. \u003cbr\u003e・With each molded color, pre-painted parts, and water-slide decals, you can reproduce a color scheme close to the image just by assembling it. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series: Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: HL-98 Hercules 21 Another Ver. \u0026 Cardia\u003cbr\u003e\r\n Size: HL-98 Hercules 21: Approx. 125mm in height, Cardia: Approx. 15mm in height\u003cbr\u003e\r\n Material: Assembly-type plastic model\u003cbr\u003e\r\n Sculptor: Arm-Q\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/60\u003cbr\u003e\r\n JAN: 4580828668126\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The image is for illustrative purposes only. Actual product may differ. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46496811876510,"sku":"4580828668126","price":5000.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580828668126.jpg?v=1770746135"},{"product_id":"4580828674639","title":"1\/60 MODEROID HAL-X10 (Mobile Police Patlabor) (Rerelease)","description":"■Product Description\u003cbr\u003e\r\n Prototype Heavy Attack Labor HAL-X10\u003cbr\u003eFrom the anime \"Mobile Police Patlabor,\" the prototype heavy attack labor \"HAL-X10\" is being re-released in 1\/60 scale! Thanks to the high range of motion of the legs, not only the characteristic multi-legged walking form but also the hover running form can be reproduced.It can also be displayed in a floating state with the included special stand.The rear hover unit is equipped with a separation gimmick. Furthermore, this is the definitive kit that reproduces the various functions of HAL-X10, such as the hatch opening and the cockpit inside, and the running form that appeared in the TV version by attaching the included wheel parts.The armor and joint parts are molded in different colors, and with water-slide decals for reproducing markings, you can reproduce the appearance just like in the show just by assembling it. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: HAL-X10\u003cbr\u003e\r\n Size: Height: Approx. 160mm, Length: Approx. 240mm\u003cbr\u003e\r\n Material: Assembly Plastic Model\u003cbr\u003e\r\n Sculptor: Arm-Q\u003cbr\u003e\r\n Release Date: [Sale: May 2022] [Re-release: July 2026]\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/60\u003cbr\u003e\r\n JAN: 4580828674639\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The image is for illustrative purposes only. Actual product may differ. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46496812466334,"sku":"4580828674639","price":8900.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580828674639.jpg?v=1770746259"},{"product_id":"4580828674646","title":"1\/60 MODEROID Type 98 Special Command Vehicle \u0026 Type 99 Special Labor Carrier (Mobile Police Patlabor) (Rerelease)","description":"■Product Description\u003cbr\u003e\r\n After more than 30 years... The long-awaited Labor Carrier is finally being made into a 3D model, along with the command vehicle! \u003cbr\u003eForward and backup are one and the same! From the anime \"Mobile Police Patlabor\", the special vehicles \"Type 98 Special Command Vehicle \u0026 Type 99 Special Labor Carrier\" used in conjunction with police Labors are being re-released! \u003cbr\u003e\u003cbr\u003e・Under the thorough supervision of designer Shoji Kawamori, the structure has been updated and the details have been enhanced to make it a more modern vehicle, making it the definitive version. \u003cbr\u003e・An impressive size with a total body length of 290mm. Each wheel is connected by a metal shaft and can rotate, and the tires are made of rubber. The patrol lights and windows are made of clear parts. \u003cbr\u003e・In addition to the forward and backward rotation of the wheels, the towing vehicle has a left and right swing mechanism at the front wheel section, allowing the vehicle to turn left and right. The storage and deployment mechanism for the floodlights on top of the vehicle body and the design of the driver's seat are reproduced. \u003cbr\u003eThe rear multi-purpose hangar can accommodate police labors that appeared in the show, such as the separately sold MODEROID Ingram, Peacemaker, and Valiant, and also features movable arms for securing labors, a rotating crane, and an extendable step mechanism. \u003cbr\u003eThe outriggers have an extendable mechanism. The multi-purpose hangar can be jacked up vertically at a 90-degree angle, allowing you to recreate the impressive deck-up scene of loaded labors from the show! \u003cbr\u003e\u003cbr\u003eIt comes as a set with a command vehicle of the same scale, making it an essential item for recreating the formation of Special Vehicles Division 2. \u003cbr\u003eWith color separation using molded plastic, some pre-painted parts, and water-slide decals for recreating the vehicle markings, you can recreate the appearance just like in the show just by assembling it. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: Type 98 Special Command Vehicle \u0026 Type 99 Special Labor Carrier\u003cbr\u003e\r\n Size: Labor Carrier Total Length: 290mm, Command Vehicle Total Length: 55mm\u003cbr\u003e\r\n Material: Assembly Plastic Model\u003cbr\u003e\r\n Sculptor: Arm-Q\u003cbr\u003e\r\n Release Date: [Sales: July 2023] [Second Re-release: July 2026]\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/60\u003cbr\u003e\r\n JAN: 4580828674646\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The photos shown are of a sample product. The actual product may differ in some specifications. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46496813744286,"sku":"4580828674646","price":8500.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580828674646.jpg?v=1770746394"},{"product_id":"4580828674622","title":"1\/60 MODEROID ARL-99 Helldiver (Mobile Police Patlabor) (Rerelease)","description":"■Product Description\u003cbr\u003e\r\n The prized Type 99 sorties! 1\/60 scale ARL-99 Helldiver\u003cbr\u003eFrom the anime \"Mobile Police Patlabor\", the ARL-99 Helldiver, an airborne labor belonging to the Japan Ground Self-Defense Force, is being re-released as a 1\/60 scale plastic model! A realistic model sculpted in the style just like in the show. Each joint is movable and the dive brake deployment is reproduced. A 40mm rapid-fire cannon, combat knife, and spare head parts are included. The armor, joints, and clear parts are each molded in different colors. Furthermore, with pre-painted parts and water-slide decals for reproducing markings, you can reproduce a color scheme close to the image just by assembling it. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: ARL-99 Helldiver\u003cbr\u003e\r\n Size: Overall height: approx. 135mm\u003cbr\u003e\r\n Material: Assembly plastic model\u003cbr\u003e\r\n Sculptor: Arm-Q\u003cbr\u003e\r\n Release Date: [Sales: July 2021] [Third Re-release: July 2026] [Second Re-release: July 2024]\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/60\u003cbr\u003e\r\n JAN: 4580828674622\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The image is for illustrative purposes only. Actual product may differ. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46496819773598,"sku":"4580828674622","price":4200.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580828674622.webp?v=1770746622"},{"product_id":"4580828674653","title":"1\/60 MODEROID AV-98 Ingram (Mobile Police Patlabor) (Rerelease)","description":"■Product Description\u003cbr\u003e\r\n The Patlabor series begins deployment in MODEROID. 1\/60 scale plastic kit, AV-98 Ingram. \u003cbr\u003eFrom the anime \"Mobile Police Patlabor,\" the \"AV-98 Ingram\" is being re-released as a 1\/60 scale plastic model! A realistic model sculpted in the style of the show. It is a convertible kit that allows you to choose to assemble either Unit 1 or Unit 2. Each joint is movable, and various weapons are included, including a 6-barrel revolver cannon and anti-Labor stun sticks (long and short). With four molded colors (white, black, gray, and clear) and pre-painted parts, you can reproduce a color scheme close to the image just by assembling it. Water-slide decals are included to reproduce the markings used in the theatrical version, TV version, and REBOOT version. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: AV-98 Ingram\u003cbr\u003e\r\n Size: Overall height: approx. 135mm\u003cbr\u003e\r\n Material: Assembly plastic model\u003cbr\u003e\r\n Sculptor: Arm-Q\u003cbr\u003e\r\n Release Date: [Sales: January 2021] [Fourth Re-release: July 2026] [Third Re-release: January 2025]\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/60\u003cbr\u003e\r\n JAN: 4580828674653\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The image is for illustrative purposes only. Actual product may differ. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46496820691102,"sku":"4580828674653","price":3800.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580828674653.webp?v=1770746750"},{"product_id":"4580799834124","title":"1\/72 Patlabor 2: The Movie: F-15 Kai Eagle Plus Plastic Model Kit","description":"■Product Description\u003cbr\u003e\r\n The long-awaited 1\/72 F-15 Kai Eagle Plus plastic model kit for Patlabor 2 fans is finally here! The shape has been changed from the 1\/144 Eagle Plus, the amount of detail has been increased, and everything has been newly remade in 1\/72 scale. Two types of canopies are available. When you assemble the engine parts, it will feel as if you are building a model of an actual existing fighter jet. With thorough supervision by the designer Shoji Kawamori, you can create the F-15 Kai Eagle Plus that you saw in the movie theater and on TV with your own hands. Since it is made of polystyrene, please use polystyrene adhesive. First-run bonus: 3D printed seat \u0026 pilot\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: HMA (HMA)\u003cbr\u003e\r\n Series： Mobile Police Patlabor 2 the Movie\u003cbr\u003e\r\n Size: Approx. 25cm when assembled\u003cbr\u003e\r\n Weight: Approx. 300g\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Contents\/Accessories: First-run bonus: 3D printed seat \u0026 pilot\u003cbr\u003e\r\n Scale: 1\/72\u003cbr\u003e\r\n JAN: 4580799834124\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"hma","offers":[{"title":"Default Title","offer_id":46543342272670,"sku":"4580799834124","price":10450.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580799834124.webp?v=1771608696"},{"product_id":"4580828675681","title":"1\/60 MODEROID AV-98 Ingram Reactive Armor (Mobile Police Patlabor) (Rerelease)","description":"■Product Description\u003cbr\u003e\r\n This is the final sortie for the Special Vehicles Division 2, Second Platoon. Do your best. \u003cbr\u003eFrom the theatrical anime \"Mobile Police Patlabor 2 the Movie\", the \"AV-98 Ingram Reactive Armor Equipped\" is now available as a MODEROID plastic model kit! The heads of Units 1, 2, and 3 that appeared in the film are all included, and by selecting them together with the water-slide decals for reproducing the markings, you can assemble each unit. In addition to the normal state, the Unit 3 head can also be reproduced with the ECM pod deployed, which is equipment for electronic warfare, by swapping parts. The Unit 1 head comes with a cover part to protect the main camera, and you can choose to display the cover open or closed. A revolver cannon, stun stick (long and short), and riot gun are included.In addition to the reactive armor equipped state, this product also includes parts to reproduce the \"Ingram Basic Unit\", which was used as an experimental machine for data collection!By using the chest part with the rising sun emblem removed and the shoulder parts without the police lights, you can also assemble Units 1 to 3 in their basic state. Furthermore, bonus parts, including \"WXIII glove parts,\" are included. By combining these with the separately sold \"MODEROID AV-98 Ingram\" and the head parts and Special Vehicles Division 2 emblem decals included with this product, you can complete the Unit 1 and Unit 2 as they appeared in the third theatrical film. This product makes it possible to recreate various variations of the Ingram, making it a very high-value kit. \u003cbr\u003e*With this product, you can choose to assemble either the \"Ingram with reactive armor\" or the \"basic Ingram.\" \u003cbr\u003e*This product is a combination of some parts from \"MODEROID AV-98 Ingram\" and newly sculpted parts. It is not possible to assemble the standard equipped AV-98 Ingram. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Size: Overall height: approx. 135mm\u003cbr\u003e\r\n Product specifications: Assembly plastic model\u003cbr\u003e\r\n Sculptor: Arm-Q\u003cbr\u003e\r\n Release date: [Release: January 2023] [Re-release: July 2026]\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/60\u003cbr\u003e\r\n JAN: 4580828675681\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The image is for illustrative purposes only. Actual product may differ. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46566083231902,"sku":"4580828675681","price":5500.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580828675681.webp?v=1772134219"},{"product_id":"4580828675674","title":"1\/60 MODEROID AV-2 Variant (Mobile Police Patlabor) (Rerelease)","description":"■Product Description\u003cbr\u003e\r\n The new main AV of the Special Vehicles Division 2, now available as a kit for the first time! MODEROID AV-2 Variant\u003cbr\u003eFrom \"Mobile Police Patlabor 2 the Movie\", the new Patlabor \"AV-2 Variant\" manufactured by Shinohara Heavy Industries is now available as a 1\/60 scale plastic model! It comes with a revolver cannon, stun stick (long and short), and a dedicated shield. The arm knuckle guards can be displayed with or without by swapping parts. The armor and joints are color-coded with molded colors, and some parts, including the distinctive chest canopy, are made of clear parts. Furthermore, water-slide decals for reproducing markings are included for the 1st and 2nd squad's respective units! Just by assembling it, you can recreate the appearance just like in the movie. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series： Mobile Police Patlabor\u003cbr\u003e\r\n Size: Overall height: approx. 135mm (height to the top of the head)\u003cbr\u003e\r\n Product specifications: Assembly plastic model\u003cbr\u003e\r\n Sculptor: Arm-Q\u003cbr\u003e\r\n Release date: [Sale: August 2022] [Re-release: July 2026]\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: 1\/60\u003cbr\u003e\r\n JAN: 4580828675674\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The photos shown are of a sample product. The actual product may differ in some specifications. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":46566086475934,"sku":"4580828675674","price":4500.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4580828675674.webp?v=1772134480"},{"product_id":"4904810095644","title":"Synergenex Hunter Wolf Patlabor Second Model","description":"■Product Description\u003cbr\u003e\r\n The second collaboration between Mobile Police Patlabor and Zoids! Comic adaptation project \"ZOIDS×PATLABOR Code Name In \"BUDDY,\" the Hunter Wolf Metropolitan Police Department Unit 2 appears, partnering with the Ingram MARK III Unit 2.\u003cbr\u003eThe machine's design is by renowned mechanical designer Hideki Tenjin. Headgear mechanical designer Yutaka Izubuchi supervised the production, and scriptwriter Kazunori Ito was involved in creating the world setting.\u003cbr\u003e\u003cbr\u003eHunter Wolf Unit 2 has been made into a Metropolitan Police Department specification with headgear and police lights.\u003cbr\u003eNewly sculpted head armor parts reproduce Unit 2's calm and intelligent face.\u003cbr\u003eWhen the switch is turned on, it starts moving forward while opening and closing its mouth.\u003cbr\u003eIt can be operated in two patterns other than the normal form.\u003cbr\u003eIn \"High-Speed Movement Form,\" the wings on the back are raised and the boosters are pushed in, causing the boosters to rotate as it walks.\u003cbr\u003eIn \"Shockwave Emission Form,\" the wings and boosters on the back are tilted forward, causing the boosters to rotate and the wings to move up and down as it walks.\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Takara Tomy\u003cbr\u003e\r\n Item No: 095644\u003cbr\u003e\r\n Series: Zoids (ZOIDS)\u003cbr\u003eMobile Police Patlabor\u003cbr\u003e\r\n Size: ■Package size: W290 x H218 x D75 (mm)\u003cbr\u003e■Total length: Approx. 280 mm\u003cbr\u003e\r\n Product specifications: ■Uses 1 AAA alkaline battery (battery sold separately.)\u003cbr\u003e\r\n Target age: 15 years and older\u003cbr\u003e\r\n Contents\/Accessories: Assembly manual (1), Pack S (1), Mech unit (1), Excavation pack A (1), Excavation pack B (1), Excavation pack C (1), Graffiti label (1)\u003cbr\u003e\r\n Copyright Notice: ©HEADGEAR\u003cbr\u003e© TOMY\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4904810095644\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n *The image is a CG image using prototypes and design data. The final specifications, shape, and coloring may differ.\u003cbr\u003eUses one AAA alkaline battery (battery sold separately).\u003cbr\u003eREQUIRES 1 LR03 (AAA SIZE) BATTERIES (NOT INCLUDED)\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"takaratomy","offers":[{"title":"Default Title","offer_id":46650371801246,"sku":"4904810095644","price":4950.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4904810095644.webp?v=1774638650"},{"product_id":"4905083201541","title":"1\/43 Mobile Police PATLABOR TYPE-J9 GRIFFON","description":"■Product Description\u003cbr\u003e\r\n Griffon has arrived! \u003cbr\u003e\u003cbr\u003e From the anime \"Mobile Police Patlabor,\" the black labor, TYPE-J9 Griffon, makes its debut in the ACKS series in 1\/43 scale! \u003cbr\u003e Under the supervision of Yutaka Izubuchi, this latest version of the Griffon has been finished with meticulous attention to proportion. \u003cbr\u003e Like the AV-98 Ingram Unit 1\/Unit 2, the sealing covers on various parts of the body are reproduced in plastic material, pursuing a realistic design. Combined with the built-in joints in various places, you can enjoy recreating scenes from the anime where the Griffon excels in close combat. \u003cbr\u003e The cockpit hatch can be opened without the need for replacement parts, and the wrists and ankles employ a pull-out mechanism to achieve a high degree of freedom of movement without compromising the sculpting. \u003cbr\u003e Five types of hand parts are included to give an impression of the Griffon's combat scenes, and the memorable thumbs-up pose from the anime can also be recreated. The packaging features an original illustration by Shinichi Hagiwara, who has worked on various mecha illustrations. It's a luxurious design that stands on its own as package art. Please enjoy the further evolved ACKS Mobile Police Patlabor series. \u003cbr\u003e\u003cbr\u003e【Key Features】\u003cbr\u003e・Color-coded molding, snap-together kit model that requires no glue\u003cbr\u003e・Latest version proportions meticulously supervised by Yutaka Izubuchi\u003cbr\u003e・Joint sealing parts are made of plastic, and the wrists and ankles have a pull-out mechanism, allowing for highly flexible posing\u003cbr\u003e・Cockpit can be opened and closed without swapping parts\u003cbr\u003e・Includes 5 types of hand parts and a flight unit for the back\u003cbr\u003e・Package illustrated by Shinichi Hagiwara\u003cbr\u003e\u003cbr\u003e【Product Specifications】\u003cbr\u003eSize: Total height of aircraft approx. 215mm\u003cbr\u003eTotal height with flight unit equipped approx. 225mm\u003cbr\u003eMaterial: PS\/ABS\/PVC\/PE\u003cbr\u003e・Snap-together kit model that requires no glue\u003cbr\u003e・Color-coded molding\u003cbr\u003e・Includes 5 types of hand parts\u003cbr\u003e・Includes a flight unit for the back\u003cbr\u003eSculptor\/Designer: TEAM NAVEL (UNITECH), Haru\u003cbr\u003ePackage illustration: Shinichi Hagiwara\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product specifications\u003cbr\u003e\r\n Manufacturer: Aoshima Bunka Kyozai Co., Ltd.\u003cbr\u003e\r\n Item No: ACKS No.MP-03\u003cbr\u003e\r\n Series: Mobile Police Patlabor\u003cbr\u003e\r\n Copyright: ? HEADGEAR\u003cbr\u003e\r\n Scale: 1\/43\u003cbr\u003e\r\n JAN: 4905083201541\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n *The image is a colored version of 3D design data. The actual product may differ. \u003cbr\u003e*This product is a plastic model kit. Tools etc. are required separately for assembly. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"aoshima","offers":[{"title":"Default Title","offer_id":46769543479454,"sku":"4905083201541","price":11880.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4905083201541.webp?v=1777400873"},{"product_id":"4595430617219","title":"1\/35 ROBO-DOU Type 98 Special Control Vehicle (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n The Type 98 Special Command Vehicle joins the Robo-Do Patlabor series! \u003cbr\u003eFrom the long-running popular anime series \"Mobile Police Patlabor,\" the Type 98 Special Command Vehicle joins the \"Robo-Do\" series! \u003cbr\u003e\u003cbr\u003eThe \"Robo-Do Type 98 Special Command Vehicle\" is approximately 10cm long. It is a model car that can be displayed alongside the movable Ingram figures (1\/35 scale) already released by Robo-Do. From the red light on the roof to the decals and the interior of the cabin, it is precisely sculpted. The combination of a die-cast metal chassis and engineering plastic provides weight and durability when held in the hand. The antenna is made of metal, and the tires, which have a realistic tread pattern, are made of PVC. The front wheels are also steerable. LED lighting functions are installed in the red light on the roof, the floodlight, the headlights and taillights (requires 3 AG13 batteries, batteries not included). \u003cbr\u003e\u003cbr\u003eAccessories include two types each of interchangeable front and rear license plates (\"31-18\" and \"31-19\"), two types of interchangeable numbering marking plates (\"21\" and \"22\"), and non-articulated driver figures \"Shinohara Yuma\" and \"Kumagami Takeo\" that can be placed inside. \u003cbr\u003e\u003cbr\u003eIn addition, as bonus parts, the left and right head antennas of Unit 1, the left and right head antennas of Unit 2, the visor of Unit 2, and two shields, all with the TV anime coloring, are included and can be used in combination with the previously released \"Robo-Do Ingram Unit 1\" and \"Robo-Do Ingram Unit 2 + Unit 3 Compatible Set\". \u003cbr\u003e\u003cbr\u003eAccessories: Non-articulated driver figures x 2 (\"Shinohara Yuma\", \"Kumagami Takeo\"), interchangeable front and rear number plates x 2 pairs (\"31-18\", \"31-19\"),\u003cbr\u003eInterchangeable numbering marking plates x 2 (\"21\", \"22\"),\u003cbr\u003eLeft and right head antennas of Ingram Unit 1 with TV anime coloring, left and right head antennas of Ingram Unit 2 with TV anime coloring, visor of Unit 2 with TV anime coloring, Shields x 2 with TV anime markings\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: three zero\u003cbr\u003e\r\n Series: Mobile Police Patlabor\u003cbr\u003e\r\n Size: Length: Approx. 10cm\u003cbr\u003e\r\n Material: ABS, PVC, POM, Zinc Alloy\u003cbr\u003e\r\n Product Specifications: Painted model car, equipped with LED light function for roof red light, floodlight, headlights, and taillights, batteries sold separately (requires AG13 batteries x 3)\u003cbr\u003e\r\n Sculptor: threezero\u003cbr\u003e\r\n Copyright: ?HEADGEAR\u003cbr\u003e\r\n Scale: 1\/35\u003cbr\u003e\r\n JAN: 4595430617219\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Notes\u003cbr\u003e\r\n ・The photos shown are of a sample product. Some specifications may differ from the actual product.\u003cbr\u003e・Because the painting process is done by hand, there may be slight differences between individual products. Please understand in advance. \u003cbr\u003e・Due to the nature of the paint, it may not be completely dry upon opening. If it is not dry, leave it in a well-ventilated, shaded room for 2-3 days and wait until the painted surface is dry before touching it. \u003cbr\u003e・Using it while it is still wet may cause color transfer or fingerprints, so please be careful. \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"threezero","offers":[{"title":"Default Title","offer_id":46809750470814,"sku":"4595430617219","price":12100.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4595430617219.jpg?v=1778260305"},{"product_id":"4570232585102","title":"BRICKROID AV-98 Ingram Unit 1 (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n A cool and fun robot toy! Ingram Unit 1 joins the BRICKROID series! \u003cbr\u003eBRICKROID is a collection robot series of approximately 5cm robots created with the theme of cool and fun robot toys. \u003cbr\u003eThe series is developed from various robot works using the same design format! \u003cbr\u003eThe small body is packed with the fun of lining them up and the fun of playing with them. \u003cbr\u003e\u003cbr\u003e・Total height approximately 5cm. Pre-painted finished product. Made of ABS resin. \u003cbr\u003e・Neck, arms, and legs are movable. \u003cbr\u003e・Revolver cannon and baton are included and can be held in the hands. \u003cbr\u003e・Convex block base included. \u003cbr\u003e\u003cbr\u003eThe soles of the feet have connection holes that can be attached to a 5mm diameter convex joint, and can be displayed on the dedicated base. It can also be attached to general block toys of the same size. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series: Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: AV-98 Ingram Unit 1\u003cbr\u003e\r\n Size: Overall height: Approx. 50mm\u003cbr\u003e\r\n Material: Plastic\u003cbr\u003e\r\n Product Specifications: Painted movable figure\u003cbr\u003e\r\n Contents\/Accessories: Dedicated base\u003cbr\u003e\r\n Sculptor: -moino-\u003cbr\u003eDeformed design -moino-\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4570232585102\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The image is for illustrative purposes only. Actual product may differ. \u003cbr\u003e※From June 1, 2026, \"BRICKROID Official Shops\" have been renamed to \"BRICKROID Friend Shops\". \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":47509003468958,"sku":"4570232585102","price":1800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4570232585102.webp?v=1780638202"},{"product_id":"4570232585119","title":"BRICKROID AV-98 Ingram Unit 2 (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n A cool and fun robot toy! Ingram Unit 2 joins the BRICKROID series! \u003cbr\u003eBRICKROID is a collection robot series of approximately 5cm robots created with the theme of cool and fun robot toys. \u003cbr\u003eThe series is developed from various robot works using the same design format! \u003cbr\u003eThe small body is packed with the fun of lining them up and the fun of playing with them. \u003cbr\u003e\u003cbr\u003e・Total height approximately 5cm. Pre-painted finished product. Made of ABS resin. \u003cbr\u003e・Neck, arms, and legs are movable. \u003cbr\u003e・Riot gun and revolver cannon are included and can be held in the hands. \u003cbr\u003e・Convex block base included. \u003cbr\u003e\u003cbr\u003eThe soles of the feet have connection holes that can be attached to a 5mm diameter convex joint, and can be displayed on the dedicated base. It can also be attached to general block toys of the same size. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series: Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: AV-98 Ingram Unit 2\u003cbr\u003e\r\n Size: Height: Approx. 50mm\u003cbr\u003e\r\n Material: Plastic\u003cbr\u003e\r\n Product Specifications: Painted movable figure\u003cbr\u003e\r\n Contents\/Accessories: Dedicated base\u003cbr\u003e\r\n Sculptor: -moino-\u003cbr\u003eDeformed design -moino-\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4570232585119\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The image is for illustrative purposes only. Actual product may differ. \u003cbr\u003e※From June 1, 2026, \"BRICKROID Official Shops\" have been renamed to \"BRICKROID Friend Shops\". \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":47509004288158,"sku":"4570232585119","price":1800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4570232585119.webp?v=1780638360"},{"product_id":"4570232585126","title":"BRICKROID TYPE-J9 Griffon (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n A cool and fun robot toy! Griffon joins the BRICKROID series! \u003cbr\u003eBRICKROID is a collection of robots approximately 5cm tall, created with the theme of cool and fun robot toys. \u003cbr\u003eThe series is developed from various robot works using the same design format! \u003cbr\u003eThe small body is packed with the fun of lining them up and the fun of playing with them. \u003cbr\u003e\u003cbr\u003e・Total height approximately 5cm. Pre-painted finished product. Made of ABS resin. \u003cbr\u003e・Neck, arms, and legs are movable. \u003cbr\u003e・Comes with a convex block base. \u003cbr\u003e\u003cbr\u003eThe soles of the feet have connection holes that can be attached to a 5mm diameter convex joint, allowing them to be displayed on the dedicated base. They can also be attached to general block toys of the same size. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series: Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: TYPE-J9 Griffon\u003cbr\u003e\r\n Size: Overall height: Approx. 50mm\u003cbr\u003e\r\n Material: Plastic\u003cbr\u003e\r\n Product Specifications: Painted movable figure\u003cbr\u003e\r\n Contents\/Accessories: Dedicated base\u003cbr\u003e\r\n Sculptor: -moino-\u003cbr\u003eDeformed design -moino-\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4570232585126\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The image is for illustrative purposes only. Actual product may differ. \u003cbr\u003e※From June 1, 2026, \"BRICKROID Official Shops\" have been renamed \"BRICKROID Friend Shops\". \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":47509004583070,"sku":"4570232585126","price":2000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4570232585126.webp?v=1780638515"},{"product_id":"4570232585133","title":"BRICKROID Type 99 Special Labor Carrier (Mobile Police Patlabor)","description":"■Product Description\u003cbr\u003e\r\n A Labor Carrier joins the BRICKROID series! \u003cbr\u003eBRICKROID is a collection robot series created with the theme of cool and fun robot toys. \u003cbr\u003eThe series is developed from various robot works using the same design format! \u003cbr\u003eThe small body is packed with the fun of lining them up and the fun of playing with them. \u003cbr\u003e\u003cbr\u003e・Vehicle length approximately 11cm. Pre-painted finished product. Made of ABS resin. \u003cbr\u003e・The rear deck can store the separately sold BRICKROID Ingram 1 and 2 units. \u003cbr\u003e・Equipped with wheel rotation and deck-up gimmick. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Good Smile Company\u003cbr\u003e\r\n Series: Mobile Police Patlabor\u003cbr\u003e\r\n Character Name: Type 99 Special Labor Carrier\u003cbr\u003e\r\n Size: Total length: approx. 110mm\u003cbr\u003e\r\n Material: Plastic\u003cbr\u003e\r\n Product Specifications: Painted movable figure\u003cbr\u003e\r\n Contents\/Accessories: Dedicated base\u003cbr\u003e\r\n Sculptor: -moino-\u003cbr\u003eDeformed design -moino-\u003cbr\u003e\r\n Copyright: ©HEADGEAR\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4570232585133\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n ・The image is for illustrative purposes only. Actual product may differ. \u003cbr\u003e※From June 1, 2026, \"BRICKROID Official Shops\" have been renamed to \"BRICKROID Friend Shops\". \u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"goodsmile","offers":[{"title":"Default Title","offer_id":47509004714142,"sku":"4570232585133","price":3600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4570232585133.webp?v=1780638664"},{"product_id":"4934054094035","title":"D-STYLE AV-X0 Zero (Patlabor: The Movie) (Reissue)","description":"■Product Description\u003cbr\u003e\r\n The trap set by the genius programmer, the Zero joins the battle. \u003cbr\u003e\u003cbr\u003eKotobukiya's plastic model series \"D-Style\" brings various mechs to life in a cute, miniature form. \u003cbr\u003eThe fifth release is the \"Zero\" from \"Mobile Police Patlabor the Movie,\" which was developed as the successor to the Ingram but stood as the sworn enemy of Special Vehicles Division 2! \u003cbr\u003e\u003cbr\u003e・The head and body silhouette, which are even more refined than the Ingram, are faithfully reproduced while being rearranged. \u003cbr\u003e・The head in its \"berserk state,\" which can be said to be the biggest climax of the story, is reproduced by swapping parts. \u003cbr\u003e・\"Electromagnetic baton (stun stick)\" and \"dedicated shield\" are included as equipment. \u003cbr\u003e・Hand parts in the shape of a hand blade and wrist extension parts are included. The impressive \"drawing hand\" from the movie can be reproduced. \u003cbr\u003e・The markings on the back of the machine and the dedicated shield are reproduced using tampo printing. \u003cbr\u003e? The camera eye, the black parts and red lights on the shoulders, and the gray parts of each joint are reproduced with pre-painted parts. Just assemble it and you'll get a finish that's close to the image from the show. \u003cbr\u003e? It's affordable, compact, and perfect for collecting. \u003cbr\u003e\u003cbr\u003e*This product is a re-release. \u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Product Specifications\u003cbr\u003e\r\n Manufacturer: Kotobukiya\u003cbr\u003e\r\n Item No: KP154R\u003cbr\u003e\r\n Series: Mobile Police Patlabor the Movie\u003cbr\u003e\r\n Character Name: Zero-shiki\u003cbr\u003e\r\n Size: Product size Total height: Approx. 100mm\u003cbr\u003e\r\n Material: PS・PE\u003cbr\u003e\r\n Product Specifications: Series D-Style\u003cbr\u003eProduct Specifications Plastic Model\u003cbr\u003e\r\n Number of Parts: 51-200\u003cbr\u003e\r\n Release Date: First release month January 2011\u003cbr\u003eOld product number KP154\u003cbr\u003e\r\n Target age: 15 years and older\u003cbr\u003e\r\n Copyright: ?HEADGEAR\u003cbr\u003e\r\n Scale: Non-scale\u003cbr\u003e\r\n JAN: 4934054094035\u003cbr\u003e\r\n \u003cbr\u003e\r\n ■Remarks\u003cbr\u003e\r\n *The image is of a prototype. The actual product may differ slightly. Also, it has been painted for photographic purposes.\u003cbr\u003e\r\n \u003cbr\u003e\r\n","brand":"kotobukiya","offers":[{"title":"Default Title","offer_id":47845580865694,"sku":"4934054094035","price":3520.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/files\/4934054094035.webp?v=1781202901"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/7620\/6750\/collections\/patlabor_set.webp?v=1768808936","url":"https:\/\/tsurumai-hobby.com\/collections\/category-patlabor_set.oembed","provider":"TSURUMAI HOBBY","version":"1.0","type":"link"}